Search results

  1. C

    Denali - no clutch fan

    All set, OEM pump and thermostat. One of my spring clips was lost, used a regular hose clamp on upper rad hose until I can get a constant pressure. So much room without fan. I could have done it without even removing the intake. The local book labor rate for this job is obscene; glad I did...
  2. C

    Denali - no clutch fan

    Thank you for that! I just did the install and it was sure nice only having to remove the Airaid. I used 11 ft. Lbs. on thermostat housing, 18 ft. Lbs. on pully, and 22 ft. Lbs final pass on pump bolts. These specs were from autozone web site. Hopefully those are the correct ones. The...
  3. C

    Denali - no clutch fan

    Sure would make the install easy if i don’t have to mess a fan.
  4. C

    Denali - no clutch fan

    2005 Yukon Denali water pump change, noticed there are dual electric fans on radiator but no fan on water pump pully. I can’t find any videos on YouTube showing a water pump change without removing fan shroud and clutch fan. I bought the truck used so not sure if it was removed or if there...
  5. C

    Denali XL Good combo

    Replaced front and rear z55 setup with: Arnott as-2700 rear Bilstein 4600 front 24-065009 eBay resistors I had a bad boot on left rear so time to do the job. This is a dead-smooth yet responsive setup. Very pleased.
  6. C

    Bilstein B6 4600 Shocks

    Massflo- are the fronts a direct swap-out for stock z55 autorides? I have same truck and going arnott 2700 on rear.
  7. C

    Denali dash bezel paint

    Duplicolor Gunmetal met. was a match.
  8. C

    Bilstein 4600 model # for z55 front

    Does anyone have the exact model # for stock height 4600 front for '05 Denali xl? I see this one (24-065009) fits but says excludes z55 autoride. Does that mean it just disables or wont work at all. I am putting A-2700 Arnott's on the rear. Other front shock ideas welcome, including reliable...
  9. C

    Denali dash bezel paint

    2005 xl Denali. Grey with ebony trim bezel, the grey paint appears to have some metal flake. Anyone know a good match and paint type for this?
  10. C

    Diagnose long compressor cycle

    I think I’ll soap it up and see what I get. I’ll see what Norcalss says too. Thank you.
  11. C

    Diagnose long compressor cycle

    ‘05 XL Denali - new Arnott pump is running for several minutes before turning off. I would think this means that the shcock(s) bladders seal up okay, but that there would be a leak in a connector or hose. The left bladder looks a little ragged, but can’t detect a leak. So, how difficult is it...
  12. C

    Icarsoft i990 cant find autoride

    Thank you for that. Sorry for the late thank you.
  13. C

    Icarsoft i990 cant find autoride

    having very loud compressor issues and bought i990 to diagnose suspension and other items. i am not getting any codes, nor can I find any section that lists autoride in the software. Can someone point me in the right direction to make sure my scanner is working properly? I updated firmware...
  14. C

    Changed Purge and Vent and still slow refuel

    Interesting one. I am definitely adding this to the list as this is driving me nuts and i have same symptoms exactly. Always good to keep the war department happy.
  15. C

    Changed Purge and Vent and still slow refuel

    Good info there Doubelieve. Sounds like I have some work to do to flush this one out. Thanks for those!
  16. C

    Changed Purge and Vent and still slow refuel

    2005 Yukon XL Denali extremely difficult to refuel. I changed out the canister and the purge valve and still no better. No codes present. All fuses are good. Where is next place to look? Can I assume that something is closing the vent solenoid? Or would there be another location where...
  17. C

    Wheel Poll 05 Denali

    I decided to keep the top ones. Thanks all.
  18. C

    Wheel Poll 05 Denali

    Yeah close indeed. Keep changing my mind.
  19. C

    Wheel Poll 05 Denali

    Bought this truck and am really loving it. It came with the wheels in top pic with 305's (liking the 305's stance), but I had the American Racing Torque Thrusts on my 03 (275's), which I like a lot. I was always planning to switch them over, but now I am having second thoughts, and am past the...
  20. C

    What did you pay for your HD hood?

    thanks a bunch.
  21. C

    What did you pay for your HD hood?

    Is there a good thread on Yukon mods needed for these? Are you guys folding the edge or welding a bead? Thanks.
  22. C

    Chrome molding on '05 XL Denali?

    saw this XL Denali with the comp grey and looks nice.
  23. C

    Chrome molding on '05 XL Denali?

    I'm starting to get used to it now and will probably stay as you say, but i still think there could be something to do here.
  24. C

    Chrome molding on '05 XL Denali?

    Thanks, yeah I go back and forth with it, but I do like the grey trailblazer wheels I have seen on these trucks in black. I might get a price on painting these to see if its cost effective.
  25. C

    Chrome molding on '05 XL Denali?

    Just bought a nice '05 XL Denali and going form an '03 SLT. I am not sure I like the lack of a break on the side of the black truck. Since I am not going to black it out and have polished wheels, I was thinking a chrome/stainless molding would help reduce the Van effect. I have put 160k on...

Forum statistics

Threads
129,117
Posts
1,810,709
Members
92,203
Latest member
firedog9518

Latest posts

Top