Search results

  1. T

    Service Suspension on after 2 months of rear airshocks replaced

    Since the valve was in the compressor I ordered a new one. Came 1 day shipped with rockauto, I was impressed. Turns out the previous compressor I bought in 2017 has a lifetime warranty but they didn't have any stock so I have the option to get a refund out it. The replacement fixed the problem.
  2. T

    Service Suspension on after 2 months of rear airshocks replaced

    As for the comp vent valve, since the short to ground code is showing I'm assuming the actuator is inside or attached to the compressor? I'd test some wiring but I don't know which wires to test. The first code could just be me fiddling around with the connections and seeing if everything's...
  3. T

    Service Suspension on after 2 months of rear airshocks replaced

    Plugged in a scanner and got 2 codes: C0585-04 Left rear actuator circuit open C0660-06 Level control exhaust valve circuit short to ground/open
  4. T

    Service Suspension on after 2 months of rear airshocks replaced

    The pump has been replaced about 2 years ago when it was first showing signs it was going out (getting louder) How the fuse/relay be bad if the pump still turns on? Before I posted I did a quick turn on and the pump ran, threw on a trailer for weight and watched it drop down and stop at...
  5. T

    Service Suspension on after 2 months of rear airshocks replaced

    2008 Yukon Denali, Stock Suspension I have replaced the rear air shocks which were blown out at the bottom with Arnott AS2708's back in May without issue. For a week now I've been getting the Service Suspension message off and on. When I look back at the air shocks I can see the bags aren't...
  6. T

    Engine cooling fan always on when running, a/c-recirculation 3 blink

    It did plug-in-play though all the functions worked, besides the a/c issue.
  7. T

    Engine cooling fan always on when running, a/c-recirculation 3 blink

    Got it back from the dealership. Turned out to be a bad wire from the low pressure switch, it was reading low signal on their tester and traced a broken connection somewhere In the middle of the wire. All is well now.
  8. T

    Engine cooling fan always on when running, a/c-recirculation 3 blink

    Ended up testing a different high pressure a/c switch and hvac control module, not difference.
  9. T

    Engine cooling fan always on when running, a/c-recirculation 3 blink

    I appreciate the offer, however I'm further up north. I haven't scheduled to go into the dealership so they could do the diagnosis and I can go from there, if it turns out to be something like the ECM I'll just trade it in.
  10. T

    Engine cooling fan always on when running, a/c-recirculation 3 blink

    No one really.
  11. T

    Engine cooling fan always on when running, a/c-recirculation 3 blink

    To reiterate the HVAC controls. I start the car cold, for 15 seconds the high speed fans are off, i turn on hvac power, I have recirculation function, and Automatic isn't forced on. After 15 seconds the high-speed fans turn on, and when pressed the recirculation and AC buttons flash 3 times...
  12. T

    Engine cooling fan always on when running, a/c-recirculation 3 blink

    ELM327. I have replaced the engine temp sensor, the a/c pressure sensor, and have swapped out the two sensors behind the bumper that monitor outside air temp
  13. T

    Engine cooling fan always on when running, a/c-recirculation 3 blink

    Ac was always ice cold, the system just stopped automatically one day, even when I jump a 12-volt source to the ac compressor with the car running it's still ice cold. I threw a A/C recharger on and showed full. No leaks anywhere. There is no codes. I don't have a way to test high and low...
  14. T

    Engine cooling fan always on when running, a/c-recirculation 3 blink

    I've bought another AC sensor to see if the other one was bad. Does anyone know if they're supposed to be constant power going to the AC compressor, because I'm not getting any juice, I don't know if the reason why the fans are on if it's cutting the power to the compressor or not
  15. T

    Engine cooling fan always on when running, a/c-recirculation 3 blink

    There's a new belt on it, I've already jumped the compressor with an outside 12v source and it blows cold air inside
  16. T

    Engine cooling fan always on when running, a/c-recirculation 3 blink

    I ended up testing on them both yesterday, I swapped them around and I still had outside temperature readout so I know they're both fine.
  17. T

    Resetting or calibrating outside temp sensor

    .
  18. T

    Engine cooling fan always on when running, a/c-recirculation 3 blink

    Since you said the compressor plug, I just checked it both with running and not and I get no power. The relay side is fine.
  19. T

    Engine cooling fan always on when running, a/c-recirculation 3 blink

    Update. I ran a 12 power source to the a/c compressor while the motor was on, the clutch engaged and i got cold a/c. AC and recirc button still flashing 3 blinks, assuming now that the wire going to the AC compressor is bad and the engine is reading that it's non-functioning so the high-speed...
  20. T

    Engine cooling fan always on when running, a/c-recirculation 3 blink

    Engine temp is fine, a/c ran super cold 1 day ago. Day later I started the car, 85° outside, noticed the cooling fan started running, once I got into yukon I tried the a/c and the light blinked 3 times and shut off, same happened with the recirc. I tried the other controls and the only...
  21. T

    Noisy Rear Air Compressor

    Is been like that since we bought it, approximately one year ago, it has no problem functioning, is this noisy as hell
  22. T

    Noisy Rear Air Compressor

    Have a 2011 Escalade with really loud rear compressor, noting else is wrong with the functionality. Do these compressors have a filter on them to keep them quiet or would the sound be coming for something else broken on the unit?
  23. T

    08 Yukon Denali power window malfunction

    I used a similar sized wire once I found the problem. The testing wire was just that, something to test with. I ran the wire right outside of the harness, but follows the rest of the wiring. I gave it extra length so it doesn't bind up and fatigue like the last one. The broken wire was right in...
  24. T

    08 Yukon Denali power window malfunction

    Finally above 25°, found the culprit. Red/White (bigger of the two on the plug harness) wires in the side fuse box wasn't working, ran a test wire and got power back to the driver switch. Will post pics when I get on laptop.
  25. T

    08 Yukon Denali power window malfunction

    I checked with the owners manual and I couldn't find a fuse for the door. It's been way too cold to chase wires so I have to hold off for now

Forum statistics

Threads
129,174
Posts
1,811,641
Members
92,268
Latest member
willie110hh

Latest posts

Top