Fun fact, I am two weeks into my Corsa on my '23 Yukon w/6.2 and the cold start sounds like absolute trash IMO. Raspy as heck until it drops the note on cool down. I don't know if it us just because my Wrangler 392's 6.4 exhaust is tuned to be so much deeper or what, but the high pitch rasp at...
He didn't charge me for any lift links and said that they just swapped the front and back links. I don't know if there is any adjustability with those OEM ones or if it really is just that straight forward.
Good question. The steps are at the same location on the body line so they function the same in terms of being a step. but they are moved back 1" towards the rear tire as to my interact with the front wheel. See picture below.
-Tires35x12.50r22 Nitto Recon Grapplers
-Wheels: Vossen HF61 22x9.5 offset 20 Anthracite
-Lift: OEM air suspension,
Front/Rear bag links swap mod
-Exhaust: Corsa cat back system
This is my 23 AT4 I just got modified up a bit. Super happy. Let me know what you think.
-Tires35x12.50r22 Nitto Recon Grapplers
-Wheels: Vossen HF61 22x9.5 offset 20 Anthracite
-Lift: Front/Rear bag links swap mod
-Exhaust: Corsa cat back system
-Tint Note: front doors are 30% with a...
Picture. I'll get use to it. The fact that some of you actually like seeing it is encouraging to a degree. But the look of seeing little bright dots under the car just strikes a hint of "98 civic with a multi colored underglow kit" when I'm walking up to it at night. My point is, and I'll live...
They aren’t fixed. They are just so exposed. And it’s a rope led light basically.
Love the light and safety aspect but just wish it wasn’t so visible. Looks like an autozone special on a $90k vehicle. Guess I’ll mope alone
1st word problems. But I’ve had our 2023 Yukon for about 3 weeks and these running boards make me feel like I’m in a scene from fast and furious 2 (the not good one).
I mean….why on earth would GM not put these LEDs in a position where so much attention isn’t drawn to the bulb pattern, or...
Agreed to the comment above. Some Nitto Recons with the dagger sidewalls out would change the look a ton. Though I really like these AT4 wheels, on mine I had to bite the bullet on the Vossen 6 lugs bc I'd concluded that to make these stockers fit with the 35" tire on this lift I would need...
I've searched to the end of the internet. And contacted several dealerships parts departments. Even with an Ultimate VIN, nobody can clearly tell me what the part number is for the Yukon Denali Ultimate front Grill and Grill Surround.
I'm optomistic that one of you have gone down this road...
Very surprised more people haven't jumped on this Readylift SST 3" kit. I really want to see an AT4 Yukon with stock 20's on 35x12.50's with this. And no wheel spacers. Anyone ever seen an example of how that setup came out?
This is very helpful. Thank you. I don't have much perspective so maybe help me here. When your truck right now is in 4L and you move the air suspension selector to Max Height, how much more does it have to go? In theory if it still jumps up then the difference is how much travel variance...
Hey guys. Been following along here. I'm product selecting for my buddies 2021 Yukon Denali w/Air Ride. Yesterday he took the 2021 Adjustable ride height sensors acquired from Switch Suspension to an install shop who apparently was trying to put them on wrong. After being provided more...
Thanks! Since it’s a ‘19 it had the cool honeycomb Denali grille. I have it in the attic and if I get board with it I’m curious to paint the honeycomb dark grey to match the wheel pockets and transfer the black grill surround to it. Never seen that done before and very curious what it would...
For what it’s worth, if you are looking to do a 1.5” I’d suggest Motofab. We just sold the white one for a black 4x4 given the winter apocalypse that just happened and I had both for a week to swap a lot of parts and paint match to make the Denali essentially a Graphite Performance edition...
I wish you wouldn’t have posted this. Feel like it looks taller than mine. Ha. I swear the Motofab 1.5 is a little more height than the suspensionmaxx one. Looks great
I went back to the original post of that Yukon xl and it was 285/50/22 which is quite a bit smaller than the 285/55. If you find out otherwise let me know but I just don’t see it happening without a 6” suspension lift and most I’ve seen require aftermarket wheels. Such a bummer
I have a question about your post. What you are saying about the 2.5/1.5 with a 285/55/22 is my ideal setup. It's what I had on my sierra and the tire size is perfect. But the shop I rely on to install lifts wouldn't do it. They told me there was no way the tire would fit. I'm not shy about...
Here’s mine. ‘19 Denali with graphite edition parts. The front has a 1.5” lower strut spacer and the tires are 305/45r22’s on stock wheels. I’d like to be running a 285/55r22 but I’m not willing to change wheels or add spacers. Still investigating how to accomplish this on the Denali but for...
The shop was All Out Offroad in Richland Hills. I was impressed with how they treated me and squeezed me back in the schedule to resolve this issue quickly. It's pretty clear they are a "customer is always right" organization. I can't speak for all employees or locations but I would for sure...
The shop was very cool about it. Ordered a new part and is putting it in tomorrow. They aren't admitting fault but see that logic would put them as the culprit since this car just went through extended warranty cert with a fine tooth comb the week before. I had the dealership look at it to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.