Search results

  1. J

    Interior lights not coming on with opening door

    Ever figure it out? My interior lights turn on with the door open, but I can turn them off when I press the button on the light itself. And I can't turn the lights on inside with the doors closed, unless I turn the dimmer knob 'on'
  2. J

    Adding an aftermarket radio to 07-14 FAQ

    Yes I connected the GM5+ to all open connectors (except the rear AV harness, never used before, don't plan on using now) and then in the Alpine radio settings I had to select factory XM tuner, and it's been working fine for a year. No extra harness connections or anything.
  3. J

    Adding an aftermarket radio to 07-14 FAQ

    I've had my alpine x208u installed for over a year with no problems on the XM antenna. I used the maestro kit and it works as is.
  4. J

    Rear door handle rod clip

    The part number for that says it's not compatible on with my Escalade on GMpartsgiant
  5. J

    Rear door handle rod clip

    I did, I tried looking it up on a few of the GM parts websites
  6. J

    Rear door handle rod clip

    Anyone ever figure out the part number for this damn clip. My 2011 Escalade had the old style, my 2012 platinum has this style. Needless to say I butchered one beyond zip tie fixable and can no longer open my door from the exterior
  7. J

    P057C - Tech 2 BPP Calibration not available??

    There's no immobilizer menu when I go to body on the tech 2.
  8. J

    P057C - Tech 2 BPP Calibration not available??

    I have a 2011 Escalade, that I recently had tuned (mailed out ECM/PCM to have DOD/AFM disabled, and the rear cats deleted since I have an off road Y-Pipe) that I'm trying to diagnose a P057C code "Brake Pedal Position Sensor Circuit Low Voltage". I replaced the sensor with a new OE Unit, p/n...
  9. J

    Adding an aftermarket radio to 07-14 FAQ

    I retained GPS with my Alpine X208u in my 2011 escalade. I just used the maestro and GM5+
  10. J

    Front Brake Shield

    Says out of stock under the price, on Google search it says in stock, I came across that as well
  11. J

    Front Brake Shield

    Those are rears only
  12. J

    Front Brake Shield

    Anyone familiar with an aftermarket front brake shield for the NNBS? Looks like the GM part numbers 25918337 & 25918338 are discontinued. Google search doesn't yield any alternatives, but I would like to think some company like dorman makes one.
  13. J

    L94 Knocking

    I wish I could find a junkyard engine. Up in New England they're all over like $4500. Dumb
  14. J

    L94 Knocking

    Figured it out. Partially collapsed intake lifter on cylinder 6. Not enough to throw a code, but definitely knocking
  15. J

    L94 Knocking

    I changed both gaskets and installed ARP studs (I plan to install headers after this nonsense, so I figured I'd use the hardware now)
  16. J

    L94 Knocking

    Only the valve covers
  17. J

    L94 Knocking

    It runs fine, it felt like it was a little sluggish when I was in stop and go traffic, buy that could just be cause I was in stop and go traffic. When cruising I didn't notice anything negative. I'm about to pull the cam to inspect it. Just really can't afford the downtime of a full rebuild ‍♂️
  18. J

    Are PPV brakes better?

    PPV are semi-metallic which have a higher coefficient of friction vs ceramic. They may be dustier, but they do stop better
  19. J

    L94 Knocking

    2011 Escalade with RPM dependent knocking (video attached) - 293k, no codes, oil pressure around 30 at idle. Pulled valve covers, all the rockers move, so I don't think its a collapsed lifter, pushrods are straight, looking for next step to diagnose/repair. I'm not familiar with pushrod...
  20. J

    Big 3 upgrade?

    What length of wire is needed for each? I'm going to be installing an aftermarket stereo and need to order power and ground wire, want to knock this out while I'm at it, so I want to order enough (in different colors as well)
  21. J

    New Ignition Key

    Do you know a part number by chance?
  22. J

    torque specs for magneride

    maybe my searching skills suck, but I've been at it for like a half hour with no results. I'm looking for the torque spec for the TWO (2) top nuts on the strut assembly for a 2011 Escalade with Z95 Magneride. One of the nuts holds everything together, the other sits on top of that that allows...
  23. J

    Need help w/part# for front coil springs on my 2011 Yukon Denali

    Do you have the part number for the 3 nuts that holds the strut mount to the body? None of the diagrams that I've seen on the various parts sites show them
  24. J

    Need help w/part# for front coil springs on my 2011 Yukon Denali

    A dude on Cadillacforums used the febest part last year, I messaged him to see how it was working out
  25. J

    Need help w/part# for front coil springs on my 2011 Yukon Denali

    Yep, I discovered exactly that, finally found the right seats (without the ribs in the middle). Even the top nut is listed wrong via VIN search. It's too small.

Forum statistics

Threads
128,802
Posts
1,805,651
Members
91,785
Latest member
Eliteweapons
Top