Search results

  1. A

    Tahoe 2nd Row in Suburban?

    No the seats will not swap. You can swap from buckets to bench (or vice versa) within the same body style, but not from Tahoe to Suburban. The floors are shaped differently and the brackets are not the same.
  2. A

    AC Doesn't Blow In Face or On Floor

    My Suburban was doing the exact same thing as the OP, air only from the defrost vents. Before it actually stuck that way I would occasionally hear a popping sound in the lower dash area. Turns out that was the blend door actuator eating itself. I replaced the actuator & all is well. I think...
  3. A

    More Headlight Mods

    This was the old set with the halos. This was the first set I'd ever tried. This the new set, no halos and smoked shroud. For headlight housings I look for ones that are crystal clear, no fluting, etc. I've used a couple of different brands off Amazon with good results. I've also used the...
  4. A

    More Headlight Mods

    Sorry I guess I had notifications turned off, but I answered your message :)
  5. A

    More Headlight Mods

    Those are very expensive, and I don't like how they look. I did my own retrofit for less than half that.
  6. A

    Leather Conditioner?

    I like Lexol products. You can use Scrubbing Bubbles bathroom cleaner on your seats to more or less "strip" them of all oils, dirt, etc. Then go back with a good conditioner. The Seat Shop has a youtube vid on it. It works really well.
  7. A

    Rotors and pads you guys running

    I run the Wagner ThermoQuiet pads on my Suburban, they work well and don't give off any dust at all. I'll probably get around to doing the later model front conversion, I just haven't had much time to source the parts. Right now I have Bendix rotors from Rockauto, they have held up well. When...
  8. A

    Official oem/replica wheel thread

    Thanks man :)
  9. A

    Official oem/replica wheel thread

    Oops sorry, lol.
  10. A

    Found this, Interior Leather Seat Covers

    I have Seat Shop covers in my Suburban. I bought the bottoms, seat backs, and new foam for the drivers bottom. They fit great, and look like new again.
  11. A

    Steering wheel conversion

    Yes. Any GM wheel should be a direct fit, and any aftermarket will work with a GM kit. I installed an aftermarket wheel in my Suburban.
  12. A

    Official oem/replica wheel thread

    Tahoe LTZ reps here.
  13. A

    Double Din Touch screen

    I like it. Before I added the Esky cluster it was great for reading trans temp. Now I change it around to monitor different things from time to time.
  14. A

    Double Din Touch screen

    Thanks. It's a Scangauge II. I made a trim piece out of plastic and mounted it inside the cassette deck after I gutted it.
  15. A

    Double Din Touch screen

    I cut the factory bezel, reshaped and repainted it. I'm too cheap to buy that aftermarket one, lol.
  16. A

    Post Before and After Pics

    Thanks. They are Sonar headlights I bought from Amazon and did a projector retrofit.
  17. A

    Post Before and After Pics

    When I bought it. Now. I hope to paint & color match everything this year.
  18. A

    Best Exhaust System????

    I had almost the same setup for a while. Longtubes with no cats, and an MBRP cat back. The MBRP by itself wasn't bad, but when I put the headers & y-pipe it was stupid loud. My kids couldn't watch videos on road trips it was so loud. Your cats may help reduce noise some. I wound up...
  19. A

    Double Din Touch screen

    I've had two different double din head units in my '02 Suburban and I've never cut any bracket out. Both have had disc players. I currently have the Kenwood DDX573BH in there. It's not a high end unit by any means, but it gets the job done.
  20. A

    Not so sure about new tail lights

    I have the same tails and I like them
  21. A

    Daytime Running light upgrades?

    I got rid of mine. The whole housing is a turn signal now
  22. A

    Removing rear HVAC controls for flip down

    The easiest way to do it is to leave it plugged in. You can pull the knobs off the panel and tuck it up into the headliner. I did it this way for a long time. When I pulled the headliner out to redo it I decided to look more into getting rid of the back controls. There is a board in the...
  23. A

    Why wont my Zerc Grease Fittings come out of my Ball Going?...yes I know it's pressed...but...

    Yes that one is pressed in. You might get lucky by prying it out with something like a door clip tool.
  24. A

    Brand new Street Scene smooth rear bumper cover 00-06 Tahoe/Yukon/Suburban

    Lol FedEx was the cheapest at $300. Holy crap.
  25. A

    Brand new Street Scene smooth rear bumper cover 00-06 Tahoe/Yukon/Suburban

    It's smooth. I'll check on shipping this evening when I get home.

Forum statistics

Threads
129,127
Posts
1,810,892
Members
92,215
Latest member
mitchievu

Latest posts

Top