I’m currently running DJM lca and belletech spindles up front. Recently I noticed that the passenger side is higher than the driver side. My driver side torsion key bolt is half ways. On the passenger side my keys is cranked all the way down, yet the passenger side sits 1/2 higher. I’ve tried...
Need help both my rear windows stopped workin and also my passenger side mirror. Both window motors are good I wired them up to a battery and they both go up and down. I also tried a new master switch and no luck.
I'll rotate the passenger torsion bar and see what happens. The driver side is good. The passenger side the key is cranked almost all the way down to get the ride height the same as the driver side.
So yesterday I replaced my old djm lca for there new lca. I also added some old belltech spindles I had. Got it aligned and seems like my wheels stick out more. Also seems higher then before. Do the torsion bars have to go a certain way also. If anyone can help me out of appreciate it.
I checked the radiator I ran water thru it and it was flowing good my tahoe never over heated until I changed the water pump t star and upper water hose
So I recently replaced the water pump and thermostat on my 04 tahoe only because water pump was leaking a little and know after replacing that my truck over heats with in 10 minutes of driving it if anyone can help I'd appreciate it
Yeah that's were it's hitting the metal piece under the lights...I had to remove the support in between the bumper to make it fit but my bumper isn't as sturdy
So I'm doing the hd Conversion on my tahoe I cut the brackets and welded them 1.5 inches down but my bumper won't reach the bracket holes to bolt it up
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.