Search results

  1. noJeepshere

    Which Headlight is better?

    I got in an accident a while back, and now that I've got my new grille painted and my ARB bumper coming, it's time to pick some lights, but I want to make sure I get decent quality ones, and don't mind paying a little more for something that will last more than 3 years. Headlights, option A...
  2. noJeepshere

    Fishtailing

    I have an issue that is getting worse, and I'm stumped (as are my friends) as to what the issue is. My Yukon fishtails over bumps on the highway, really bad. And it only exhibits itself at higher speeds (60 and above) in a straight line. In a turn it won't fishtail at all, and its only on the...
  3. noJeepshere

    Ceramic paint/coating

    I have a set of shorty headers I need to paint before I install them next week, and am wondering what would be best to coat them with? I'm not looking to be flashy at all, just want to protect them (they're raw stainless now) and help keep under hood temps down. cent frum a smaert fone
  4. noJeepshere

    Wheel question

    This dana44 I picked from the junkyard a few weeks ago is in great shape, everything seems to be almost new, the grease in the bearings is still blue and the brake pads look untouched. However, the hubs are 3-1/2" across, but the hub hole (for lack of a better term) on the wheels on my Yukon...
  5. noJeepshere

    Front drive shaft

    Came off a 99 gmt400 Yukon, new u-joints about 20k miles ago. Doing a sas so don't need it anymore. $50 and shipping from 84010. cent frum a smaert fone ---------- Post added at 01:35 PM ---------- Previous post was at 01:30 PM ---------- cent frum a smaert fone ---------- Post added...
  6. noJeepshere

    Removing 4x4 Parts

    I have a dilemma guys, My 1999 Yukon is perfect in every way, except for the front end. The front output on the t-case has a bad bearing and is leaking despite the fact that I replaced the seal last week. Also, the driver side output on the front diff is leaking and the bearing is very bad...
  7. noJeepshere

    Solid Axle Swaps

    So... in pricing out lift kits, I remember ORD has a solid axle swap kit. I looked at it years ago and it was in the neighborhood of $1500, note the price on it now: http://offroaddesign.com/catalog/88-98SolidAxleConversion.htm Now I'm keeping an eye out for a hp44 from a Ford pickup to...
  8. noJeepshere

    Front output seal on t-case

    The front output seal on my autotrac transfer case is leaking. I have bought the part and the required fluid (blue stuff from the dealer for $8.50 a bottle) and am going to tackle this project this weekend. From what I could find in a search of the internets, it can be a little tricky to do, and...
  9. noJeepshere

    Opinions on hubcaps

    So, as I was waiting in the shop for the guys to figure out what is wrong with my front axle actuator, I was perusing the LMC truck catalog for 88-98 GM trucks, and noticed these hubcaps: Top of page http://www.lmctruck.com/icatalog/cd/full.aspx?Page=92 Now I know it says they're for 2wd...
  10. noJeepshere

    MAF sensor disconnected makes trans shift hard?

    Yesterday, I took my air cleaner tube to get to the dizzy cap to diagnose a stumbling/rough running problem. I was corroded, but since I don't have a job atm, I cleaned with some coke and put dielectric grease on all the points. Anyways, I put everything back together and forgot to reconnect the...
  11. noJeepshere

    12V outlets

    I have a question regarding the 12V outlets in the dash: how would I go about rewiring them so that they are "on" only when the truck is turned on? In other words, right now, the sockets are always live, and I want to change it so that they shut off when I turn my truck off. I often use my...
  12. noJeepshere

    Transfer case fill plug location

    So I'm trying to change the fluid on my NP246 autotrac transfer case, and the location for the fill plug does not seem right... Number 22 in the diagram: https://www.drivetrain.com/images/stories/product_imgs_large/np246_part_ill_lg.jpg That doesn't seem high enough to put the 2 quarts...
  13. noJeepshere

    Rear blower motor wiring diagrams

    I need the wiring diagram for both the rear Tahoe a/c and Suburban rear heat-a/c combo. I just bought the blower housing from a 94 'burb with heat-a/c and need to figure out the wiring on it. Anybody have them? sunlit? Bueller?
  14. noJeepshere

    Check Engine Light

    Isn't it supposed to come on when you start the truck as part of the bulb test? Usually it comes on in the summer because the the computer starts opening the EGR valve and since I have mine blocked off, it throws a code. It hasn't come on at all recently, even with key on engine off. Odd, you...
  15. noJeepshere

    Lifting an '05 Z71

    I have a 2005 Z71 that I'd like to lift 2" or so. My truck does not have the auto-ride rear suspension, just the self-leveling shocks and coils in back. I know these are lifted somewhat compared to "normal" models, by about an inch or so. I'm wondering if I could put coil spacers and shock...
  16. noJeepshere

    Best Shorty Headers

    Over the winter, my 99 Yukon has developed an exhaust leak on the passenger bank. Being the kind of guy I am (if it ain't broke, don't fix it) I feel this is a great opportunity to upgrade this part of my exhaust. Long tubes are out of the question as I'm going to school in the fall and the...
  17. noJeepshere

    Here's How to Load a Yukon

    Notice the squat: this is at stock ride height. Side view: I played a lot of Tetris growing up :) And the trailer as well For sh*ts and giggles: Edit: Forgot to say what I'm doing. I moved from Alaska back to Washington to go to school in the fall.
  18. noJeepshere

    Spring issue

    I rebuilt my rear spring packs last week to install an add-a-leaf, and now it seems like my truck is dogtracking (kinda sideways) going down the road. I did some careful measuring underneath and the driver side of the axle is 1/16th of an inch closer to the front than the passenger side. Will...
  19. noJeepshere

    What might I be up to?...

    Teaser pic:
  20. noJeepshere

    Rear Heating Solutions

    Rear Heating Solutions HVAC guys weigh in So, living up here in the great white north means cold for much of the year, with a few months of warm weather tossed in for good measure. So I'm looking into installing a rear heater in my 99 Yukon. Thing is, those ceramic heaters (or anything...
  21. noJeepshere

    Rear heat ?

    If you read my Cold! thread, you know it's cold here. That leads to the question, what can I do about effective rear heat in my 'kon? I was thinking maybe I could adapt parts from a Suburban rear heat/ac system to my rig, and have it blow hot air out of the face vents. Better than nothing...
  22. noJeepshere

    Cold!

    When the thermometer says this: Your exhaust looks like this: The air is so cold that it literally cannot hold any moisture, so the moisture in your exhaust condenses immediately and eventually settles to the ground, and on your car. And other bad things happen, the drive belt...
  23. noJeepshere

    Been gone, been busy

    Wow, things do change when you leave a while then come back. I hope to stick around a little better now. Mid-summer, all hell broke loose at work and I became a relative unknown in normal society, and things are now starting to slow down a bit. But with all that, I have managed to do some...
  24. noJeepshere

    Rear a/c question

    I was wondering the other day as I was organizing the toolbox in the back of my Yukon, I looked up and saw that there was a bump that went across the ceiling over the second row that looked like it could have a/c vents for the third row passengers (if I had that 3rd row...) I was wondering if...
  25. noJeepshere

    Front brake upgrades

    What do y'all recommend for a relatively inexpensive brake upgrade for the front on my Yukon? The brakes are currently doing their little squeaking death squeal and I budgeted about $4-500 for upgraded calipers and rotors. I'm looking to possibly get larger diameter rotors (need to fit inside a...

Forum statistics

Threads
137,688
Posts
1,989,635
Members
102,689
Latest member
Woned2004

Latest posts

Back
Top