Search results

  1. C

    2019 yukon xl No Start

    same thing on my 15 yukon, replaced neg cable per gm Bulletin No.: 18-NA-161. and push buttion was ok , later about 3 mos the starter went out .
  2. C

    loud knock noise after rear crank seal replacement

    New update, checked new oil filter and it was wrong, marked pf63, but inside was wrong, so quick check installed old filter and 85% noise gone, check codes p0300 only, lightly raised rpm 2000 rpm and pop noise and knock gone but light missfires #2,3,8 only, check plugs looks good but p0300...
  3. C

    loud knock noise after rear crank seal replacement

    sorry about that posting in wrong place but sh@t happens, anyway yes converter tight, no wires at this time( she needed it back) and I told her NOT TO DRIVE IT, only thing I can think of is oil filter, never seen gm 1 bad, but possible first time for everything, just thinking would loose...
  4. C

    loud knock noise after rear crank seal replacement

    thanks just copied and paste it
  5. C

    no crank,no start when seat is moving - SOLVED

    sorry for solong wait, but the push button and new starter fixed the problem , go figuer
  6. C

    loud knock noise after rear crank seal replacement

    2015 gmc yukon danile 6.2 6 spd trans 4x4, ok here we go, friend had alight drip under truck shop said rear main, so she brought it to me and looked at it and yes rear seal and also possible by intake area, so removed trans and rear cover, cleaned and installed new seal and rubber o-ring type...
  7. C

    loud knock noise after rear crank seal replacement

    sorry about I'm tired and pissed, how do I repost in corrct thread?
  8. C

    loud knock noise after rear crank seal replacement

    2015 gmc yukon danile 6.2 6 spd trans 4x4, ok here we go, friend had alight drip under truck shop said rear main, so she brought it to me and looked at it and yes rear seal and also possible by intake area, so removed trans and rear cover, cleaned and installed new seal and rubber o-ring type...
  9. C

    2019 no crank nor start

    I have the same concern, did battery,both cables, checked grounds, checked underhood block, found push button was fault, replaced ok, than customer tells me seat move at the same time as push button no start, recheck no seat move starts all time, so I told her for now no seat move until engine...
  10. C

    new to thread

    thanks for the membership, will enjoy all posts, never to old to learn, thanks again
  11. C

    no crank,no start when seat is moving - SOLVED

    2015 gmc yukon denili, was told that it wont start when button pushed(brake applied) check and found both pos and neg cables bad, replaced and told customer battery weak, they replaced battery, sometimes start and then no start, recheck all groungs at motor side( ok)underhood fuse block seated...

Forum statistics

Threads
137,139
Posts
1,955,060
Members
101,777
Latest member
Needhlp

Latest posts

Back
Top