Search results

  1. N

    New to lowering my 2007 Tahoe- need advise please!

    2007 Tahoe no air ride. Bought 3/2 drop with spindles. Also bought 0-3 drop spindles and installed at 0”. I want to drop the struts an additional 1 or 2 inches. Will this affect the front end getting lined up?
  2. N

    need strut recommendation for 3/2/ drop

    2007 Tahoe without air ride. We just installed a 3/2 drop (front spindles/ rear springs, shock relocation). After getting front end realigned we now need to replace other front suspension parts. Do we need special length struts? What does the group recommend for front struts/ rear shocks?
  3. N

    Lowering Kits

    I’m looking at adding the 2/4 lowering kit ( spindles, rear springs). This 2007 Tahoe is stock without an air ride suspension. Currently the shocks installed are in good condition. Can I just use a spindle/ rear springs kit with my current shocks? Will the ride quality be the same?
  4. N

    07 fuel pump and gas gauge

    My 07 Tahoe gas gauge isn’t working. I’m going to put in a new pump module. Which pump should I put in? How can I check continuity for the gauge?
  5. N

    Passenger front door opens- shuts engine off.

    2007 Tahoe 5.3 (recently rebuilt). With the engine idling I can open the front passenger door and engine shuts off/ loses all gauges. Anyone ever experience this?
  6. N

    VLOM removed from valley cover

    I wish I could find that video. It’s all good though.
  7. N

    VLOM removed from valley cover

    I drilled and tapped the 8 risers that supplied the VLOM. I watched a video of a guy that did the same thing. When he runs the engine oil is sucked out of the valley and deposits said oil into the intake.
  8. N

    VLOM removed from valley cover

    Deleted DOD. Plugged oil towers and removed VLOM from valley cover. Will this cause the engine to suck oil into the intake?
  9. N

    2007 Tahoe coolant reservoir sensor? - SOLVED

    2007 Tahoe rebuilt 5.3. Putting this Tahoe back together after 4 years. We don’t remember what goes here. While filling the reservoir we noticed water leaking from the bottom of said reservoir. Thanks for lookin*!
  10. N

    Need engine wiring harness advise

    Pulled apart. Son didn’t take 2 minutes to secure the harness before he pulled the Tahoe out to storage!
  11. N

    Need engine wiring harness advise

    Getting ready to install a rebuilt engine in a 2007 Tahoe. Found the wiring harness damaged. Options are a good harness or splicing a new piece into existing harness. I have found a local harness from a 2009 Tahoe. What do I need to watch out for? Note- this part of the harness is the end. See...
  12. N

    Budget rebuild- Can it be done?

    Anddd I still have the 5.3 on the stand, lol.
  13. N

    2007 Tahoe cam choice

    2007 Tahoe w/ 5.3 non flex fuel. I am rebuilding the engine now. Went back with stock bore flat tops. Doing the DOD delete. Had the 799 heads reworked, including installing BTR springs. The cam I’m using is an older BTR low lift truck cam. I’m having second thoughts concerning this cam and...
  14. N

    Rebuilding the 2007 250K mile 5.3- which engine sensors would you replace? Any other tips?

    Rebuilding the 5.3 in an 07 Tahoe. I bought Sac City main gasket install spacers (do I need to buy the oil pan gasket jig also) Bought a Sac City Barbell, New BTR cam, lifters, and Beehives (deleting AFM with new tune from a local). Which sensors get replaced- regardless of age? Do you use...
  15. N

    Best way to put the engine back in the 07 Tahoe

    I didn't pull the motor out but looks like I'm putting the motor back in the 2007 Tahoe. My son pulled the trans out, using the 4-post lift. He then pulled the heads and lastly he pulled out the short block. Can the engine be installed a better way? I would love to put everything on the motor...
  16. N

    4L60E maintenance?

    Thx Captain. Is there a kit that includes most of the parts you mentioned?
  17. N

    4L60E maintenance?

    Bought a cheap fixer-upper 07 Tahoe with 250K On the odometer. The engine is getting freshened up. My question concerns the trans, a 4L60E. As far as i know there were no problems concerning the trans. Other than replacing front/ rear seals what maintenance Should I perform to this transmission?
  18. N

    2007 5.3 rebuild-Shorty headers or OEMs?

    2007 Tahoe with the LY-5 engine. Freshening up the engine right now. SUV will be a daily driver. Rebuilding the 5.3 now. Stock everything but Stage II truck cam & kit. 799 heads- fresh from the machine shop. Cam-matched springs were installed. Should I stay with the cast exhaust manifolds or...
  19. N

    Budget rebuild- Can it be done?

    This 5.3 is going in an 07 Tahoe. Going to be daily driver with light towing. I am going to rebuild the engine. This is what I have: Gen 4 5.3 block and crank-both honed/polished/checked by a builder. Cam Bearings installed. New freeze plugs installed. Floating rods (with only 7 good pistons!)...

Forum statistics

Threads
135,510
Posts
1,922,436
Members
100,666
Latest member
Txhunter

Latest posts

Top