on that era the module will only read the light/bulb resistance. and yes some aftermarket lights have junk bulbs. I would look into the plug end where the corrosion happened. Since this post is months old I'm sure you found and fixed the problem by now.
The rear fenders may end up being another application customized by you. Since you would be changing all four corners you have more options as long as they all compliment eachother. It could be a cool project.
I have done ground kits like that before and they always make me think i should have...
I am also in Florida, The part of ethanol that causes condensate is Air. as long as your system is tight and keeps all areas filled with fuel things are good. Now the top of a steel fuel tank that is not topped off is another story. Or an engine with a leaky injector that is left sitting can be...
It sounds like its more to the front of the motor. It may just be the video. if its more to the front it would be the timing chain tensioner/guides. They are plastic and break when their old.
I made the rad support and fenders as padded as possible and spent alot of time laying chest down on them through out a DOD/VVT delete. I also used cinder blocks layed on the ground flat side up on the concrete in a halo around the front end to step on as needed. there was also the times when i...
The repair shop should be able to tell you how many springs were replaced and hopefully why. Without buying it and testing things yourself you stuck depending on peoples honesty. Are you mechanically inclined? You can also scan the engine and see of old codes are still stored. look for bolts...
The vvt oil pumps are a little higher pressure. I went with a melling High pressure pump and changed the whole thing for dependability. I used the highest pressure spring, it came with three options. My pressure is 60 to 80.
Note, the high pressure did set off a engine code and dash light that...
In my Wifes 2015 Tahoe Flex fuel What I have learned is E85 is not good in a sitting tank or system. It will condensate quickly and then will rust a sitting system. We run it if the tahoe is always being used. The overnight and cold weather start ups and the smell you get is the condensate...
I went with the link bar lifters hoping they would not be too noisy. My purpose was to make it more tough and dependable. I just couldnt get past a plastic tray keeping my lifter from rotating.. I know the trays have well over proven themselves. This is a daily driver work truck that hauls a...
Mevotech makes some nice suspension parts that are real upgrades to GM parts.
Also as far as rear end look into Truetracks, they are nice tough limited slips that lock up solid. They use a different oil though, be aware of that.
Lastly, look into Tick Performance for cams, they have a nice line...
Did you ever resolve the issue? I am about to change mine for the second time here. I did not change the race last time, this time I will. I am also going to see about which parts maker I use this time, I feel some may be much better than others.
Did you see how much play the drivers side of the rack had in that video? They are rubber bushing-ed but that seemed like alot of movement. I am talking about your diag video btw.
I'm finding several electrical issues popping up on my Wifes 2015 Tahoe. I have worked through all of them to date and find Most issues come down to the electrical connectors at the plugs. I have also found issues with the crimped connectors on alot of the heavy positive and negative cables. To...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.