Search results

  1. B

    SOLVED Please help, engine runs very poorly!

    Is there any chance you have a leaking exhaust/broken exhaust manifold bolts?
  2. B

    Rear Hatch lock

    It's doubtful that the lock would cause a programming issue. The lock just sits there until it gets a command to lock or unlock. While you have it opened up, you should check for voltage going to the lock while a helper hits the power lock switch. If you're not getting voltage, a new lock won't...
  3. B

    Telescoping column swap?

    I have adjustable pedals set all the way forward.
  4. B

    Telescoping column swap?

    Well dang. Sounds like more fabrication and less bolt-in than what I was hoping for. Thanks for the replies!
  5. B

    Telescoping column swap?

    I know that some later model GM trucks have airbags with telescopic columns. I'm 6'2" and mostly legs. If I get my legs relaxed my arms are straight. If I get my arms relaxed my knees are in my chin. Either way sucks for anything but the shortest trips. I either need to move the steering wheel...
  6. B

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    https://a.co/d/a0j2ZlH I have one of these kits, definitely worth having around.
  7. B

    Telescoping column swap?

    Would any of you fine folks know if there is a telescopic steering column out there that would bolt up (or mostly bolt up) to my 05 suburban 1500 LT? Maybe a Denali/Escalade or a later model? Thanks!
  8. B

    Do i need a specific knuckle for a 6 in lift kit

    You may get better responses in lifted section.
  9. B

    Help Troubleshooting Fuel Trims

    I would verify that ECT, IAT sensors are showing reasonable numbers. IAC might be leaking through. Verify that there are no exhaust leaks or intake duct leaks. I'm guessing your trim is that high trying to make up for super cold temps or the O2 sensor is showing lean. At least that's what the...
  10. B

    Transfer case selector shaft positions

    EDIT- I previously posted a chatGPT response here. After rebuilding my t case it was obvious that chatGPT was wrong. Disregard.
  11. B

    Transfer case parts source??

    @rockola1971 Thanks! I placed a $400 order with them Sunday, it showed out of stock then. I just ordered one out of Minnesota for $90 about an hour ago.
  12. B

    Transfer case parts source??

    Hi, I'm having a heck of a time trying to find a selector shaft for my transfer case. 2005 suburban 1500, 4 button, RPO NP8, M30, 27 spline, splined selector shaft. The selector shaft bearing chewed up the shaft, then the cam plate chewed up the 2 followers that ride on it. My original part is...
  13. B

    Transfer case selector shaft positions

    I looked all over google and then finally asked chatGPT.
  14. B

    Transfer case selector shaft positions

    Well, since I bragged about it the other day it decided to break on me. 2005 1500 suburban LT 4x4, push button h/l/auto. When trying to switch it from 4h to 4l, there was a loud pop and the transfer case went to neutral and stayed there. I pulled the front driveshaft and the servomotor and...
  15. B

    Switches from 4 auto to 4 high on key cycle

    I thought I had my signature set up but I didn't. Hopefully it will now show that it's a 2005 1500, push button t-case. It does seem like the indication matches the actual mode. We've still got snow and ice on the back roads and I drove about 30 miles today, all in 4auto or 4h. BTW this thing is...
  16. B

    Switches from 4 auto to 4 high on key cycle

    I replaced the transfer case servomotor about two years ago. It's been working great and although I rarely need 4x4, I do cycle the transfer case through 4h/4l/auto settings monthly or so. With this recent snow I drove it in 4 auto to the tire shop for new rubber. When I got back in it, it was...
  17. B

    Driver's rear exh man. bolt

    It's time to fix some broken exhaust manifold bolts. I think I'm going to be able to get to most of them. I'm fluent in bolt extraction. The one that has me worried is the rear-most driver's side. I don't think my angle drill can get in there even if I could center it. Is there a tool or...
  18. B

    New member Arkansas

    Booneville here. Welcome.
  19. B

    Brake pedal chirp

    I'm an old wrench turner that's worked on a ton of stuff over the years, I'm certain that this is not a mechanical noise like cavitation or belt noise or bearings. It has new ribbed belts and good clean accessory pulleys, idlers, etc.. The noise is the exact same frequency and duration every...
  20. B

    Brake pedal chirp

    Stock everything except for the RC 2" torsion key lift and rear coil 3/4" spacers.. Radio, tint, mirrors, lights all stock, no brake controllers, no tuner, no CAI, no mods whatsoever.
  21. B

    Brake pedal chirp

    I am clueless on this one. 2005 LT Burb, 225k miles, all stock except 2" RC lift. I have an intermittent chirping noise that's related to applying/releasing the foot brake. The noise is not a mechanical noise, it's an electronic type chirp. It's coming from somewhere in the center of the dash...
  22. B

    Intro- 05 Burb

    This is from a few months ago, "getting to know you" phase. Oil pressure sensor failed.
  23. B

    Intro- 05 Burb

    Hi, Joined the site today hoping to figure out a few bugs with my new to me 05 LT Suburban 1500. I've been working through a bunch of issues and I'm getting down to the last few items on my punch list. I'll post those items in the proper sections. I've been lurking for a while and I look forward...

Forum statistics

Threads
134,900
Posts
1,910,541
Members
100,243
Latest member
quickfixes

Latest posts

Top