Search results

  1. mattbta

    Replaced my lower ball joints.

    Great work!
  2. mattbta

    Spare Tire Pressure Sensor

    I am pretty sure i put some PIDs into torque and was able to get spare pressure without any tech-2 changes. Would have to dig out my android and check.
  3. mattbta

    2003 Yukon XL 4x4 Pop clunk issue

    it sound like this at all?
  4. mattbta

    Turn signal relay location???

    be sure to refill the fluid
  5. mattbta

    Intermittent oil pressure loss

    when was filter last changed? any moisture or milkshake under filler cap?
  6. mattbta

    Intermittent oil pressure loss

    what is the oil level at?
  7. mattbta

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Thanks for the link!
  8. mattbta

    Rocket Man's 02 Denali Build Thread AKA "THE BEAST"

    That's a phenomenally sonic album you've got playing. Rotten Apple really tests well on good equipment. :)
  9. mattbta

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Added some more boom booms. I converted to Lux Bose in my 2004 Hoe and last summer put a shallow 8 in a pre-03 factory box in the back so i had that and the oem. Wasn't real happy as the center console sub in luxury outperformed this thing. So, impulse bought this on Amazon for $130 the...
  10. mattbta

    Rocket Man's 02 Denali Build Thread AKA "THE BEAST"

    Hoping for the best, Mark. Fight the good fight! And F cancer.
  11. mattbta

    03 Tahoe Center Link is Crooked, but Nothing is Loose...

    and make sure that centerlink is oriented correctly with the tie rod droops headed toward the back of the truck. https://www.tahoeyukonforum.com/threads/scrubbing-binding-while-turning-at-near-full-lock.86256/post-1040842
  12. mattbta

    03 Tahoe Center Link is Crooked, but Nothing is Loose...

    i want to say there are two pitman arms with different spline count or something....but i might be imagining.
  13. mattbta

    Hot air passenger side only

    I took the dash cover off but still had to pry up on the vent to get the actuator R&R.
  14. mattbta

    03 Tahoe Center Link is Crooked, but Nothing is Loose...

    Pitman sure doesn't look seated properly.
  15. mattbta

    03 Suburban LT Steering Issues, Wandering and Wobbly and Loose

    you get anything like this happening?
  16. mattbta

    03 Suburban LT Steering Issues, Wandering and Wobbly and Loose

    Another symptom from when my centerlink was oriented incorrectly was inability to keep the thing straight on heavily crowned roads and a feeling of instability at highway speed. With all your parts replaced, make sure the centerlink is installed properly: tie rod droops angled toward the back...
  17. mattbta

    Solved. New fuel pump, hard start.

    yup. my 2004 hates aftermarket sensors and did some goofy stuff with starting and cam sensor. put an oem in and back to normal.
  18. mattbta

    I got me a Tahoe!

    I also dropped a socket down the y-pipe. Fortunately used a tool like below to snag it without pulling any more of the exhaust. https://a.co/d/4dl4swy
  19. mattbta

    Low coolant temp reading

    what radiator are you running?
  20. mattbta

    Whipple 2.3L Supercharger Installation on 2007 Yukon XL Denali (6.2L L92 Motor)

    Man, this is the way I'd do it if I had the means. Enjoy!
  21. mattbta

    2003 Yukon XL SLT - New battery and alternator. Having issues with volt gauge jumping around.

    Wrong section for your year....but 2005+ rigs have RVC which is computer management of alternator output.
  22. mattbta

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    I'm about to have to hack my daughter's 2014 Camaro up to do the same. Craptastic design by GM. If you run MAX A/C the actuator will apply constant pressure to the door to keep it closed tight and eventually the plastic snaps. Here in Texas, you can't survive without MAX.
  23. mattbta

    Reworking harness for high volume Fuel Pump

    I grabbed it for a 2001 based on your site. Maybe it changed over the years? Was that the correct MY for your rig?
  24. mattbta

    Reworking harness for high volume Fuel Pump

    HTH,
  25. mattbta

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Personally, I'd keep saving and get the catted y-pipe AND a tune. I know, opinions and all. Had an open exhaust LS1 when I was 19 and it stunk so bad - that smell doesn't come out clothes easily. But, back then I did use O2 sims for the rears before I got it tuned.

Forum statistics

Threads
133,181
Posts
1,881,166
Members
98,203
Latest member
GreekThunders

Latest posts

Top