Search results

  1. signguy62

    Seat swaps

    Seat swaps? Is there a seat compatability chart somewhere? What seats fit what throughout the years. Particularly interested in GMT900 front buckets into a GMT800. 07-14 Tahoe bucket seats into a 03-07 Silverado. I know there will be issues with the seat belts. But will the seats themselves bolt...
  2. signguy62

    Anyone running Belltech coilovers?

    You have the Atomic stuff on a 07-14? Tahoe? I've got his brackets for my 03-07 RCSB that I planned on running a set of QA1's with. So the issue isn't with the brackets themselves? It's with the bearing ends on the coilovers?
  3. signguy62

    Anyone running Belltech coilovers?

    So far, I'm very impressed. They ride nice. Not too firm, not too soft.
  4. signguy62

    Anyone running Belltech coilovers?

    Yes, as I eventually figured out. It's much easier to install them straight out the box (max drop/very little spring compression) as apposed to pre setting the desired height as the directions tell you to do. As for the 3 top studs. Looks like when they were pressed in, either they tilted a...
  5. signguy62

    08 Tahoe Front Fender Replacement

    Reviving old thread.... What body panels (07-14) are interchangeable across the various platforms. Will Silverado or Avalanche fenders/hoods/bumper covers, fit Tahoes? Thanks!
  6. signguy62

    Anyone running Belltech coilovers?

    Biggest issue I ran into was adjusting them prior to install. Directions say to set them up to your desired drop prior to install. Problem is, if you only want an inch/inch and a half drop and adjust to that setting prior to install, they're too long to fit. If you install them straight out of...
  7. signguy62

    2/4 drop issue

    They are a pain in the ass to install...But they're in. Need to be adjusted a little still.
  8. signguy62

    Anyone running Belltech coilovers?

    They were a pain on the ass to install...But they're in. Need to be adjusted a little still.
  9. signguy62

    2/4 drop issue

    Thanks! That's what I'm doing. Got the passenger side in. Working on driver side now. Much appreciate the help.
  10. signguy62

    Belltech coilovers 15002 - increased ride height?

    How difficult was it to get them cranked down that far? I've got them at 178mm (7in from spring perch to bottom mount) now. And that took quite a bit of effort to get to that point. Thanks!
  11. signguy62

    New belltech coilovers in stock. Nice setup

    These Belltech coilovers suck. They ship nowhere near ready to install. Trying to preset the ride height (compress the spring) is a workout. Installation is more involved than the directions lead you to believe. The directions tell you to "follow removal process" of the factory strut to install...
  12. signguy62

    Belltech coilovers 15002 - increased ride height?

    Ha ha ha....Yeah, okay
  13. signguy62

    2/4 drop issue

    Boy was I wrong. Not only does Belltech ship these coilovers no where near ready to install. Once you get them setup per their instructions, they don't just bolt up. The three studs at the top don't quite line up with the mounting holes in the sping pockets. And they're quite a bit longer than...
  14. signguy62

    Anyone running Belltech coilovers?

    I get how they work. But here's the thing. According to the instructions, for a 3in drop the coils need to be adjusted to 155mm (measured from the base of the spring perch to the lower mount). For a 1in drop the coil needs to be adjusted to 185mm. That's a 30mm difference alone. But they come...
  15. signguy62

    Anyone running Belltech coilovers?

    Yeah, I guess I'll find out soon enough. Still have to modify the top 3 mounting holes up in the spring pocket. Once that's done and it back on the ground we'll see where it's at. Still not happy with the poor R&D and Quality control. They poor kid at Belltech was clueless when I called earlier...
  16. signguy62

    Anyone running Belltech coilovers?

    Did you ever get the coilovers? If so how are they working out? I just got a set and I'm finding them a real pain in the ass to set up. Trying to adjust them to 1 or 2 inch drop prior to install is virtually impossible. Once i got them close to where they need to be, they are still longer/taller...
  17. signguy62

    Belltech coilovers 15002 - increased ride height?

    Hey Tony, how about you just address this guy's issue here on the forum. He may not be the only one having issues with the Belltech coilovers. That and texting you or using the direct messenger here, gets about the same results as trying to contact Belltech for assistance. So, if you have...
  18. signguy62

    2" vs 3" spindles

    Yeah, I'll pass on any suggestions from you know who. I considered Atomic's stuff for the Tahoe. I like/use his stuff on my Silverado. I ended up going with the Belltech coilovers for the Tahoe. We'll see how they do. Thanks for the info.
  19. signguy62

    Another snapped spohn

    That's odd, I haven't seen any reports of Spohn arms breaking anywhere on the old internet. You would think if there was a real issue, folks would be in "all out" blast mode. Yet, I'm not seeing any Spohn trash talk anywhere. Well, except....
  20. signguy62

    New noise

    Recently 2/4 lowered my 2012 SSV. Spindles up front and coils out back. DJM rear hardware kit with trailing arm relocation brackets, shock relocation brackets and swaybar end links. Everything has been fine for over a week. Yesterday ran several errands without incident. Suddenly, while on my...
  21. signguy62

    Anyone running Spohn Rear Control Arms?

    I knew you knew what I meant. But I haven't been able to find anyone who's actually used the DJM/Spohn combination yet. Well, except Tony....But he has a "better" product he's peddling these days.
  22. signguy62

    Anyone running Spohn Rear Control Arms?

    The DJM relocation brackets move the axle rearward (back to center of the wheel well) in drops of 3+ inches. But thanks anyway.

Forum statistics

Threads
131,742
Posts
1,856,004
Members
95,991
Latest member
dirtymax6610
Top