Search results

  1. Geoffsfas10

    Skid Plates for our GMT900s?

    Hey sorry i missed this, i never got notification, but just like stated above, i pulled a bolt from the front plastic skid plate and just ran it into all the holes, and then used some stainless hardware in the proper size. worked fine, they are still under there and its been a while.
  2. Geoffsfas10

    Catch Can ****

    Did that size work for yours? those valves seem small compared to the one i have, but im getting pretty tired of the oily water puddles. i want to say mine needs a 3/8" valve
  3. Geoffsfas10

    Catch Can ****

    Rather then start a thread, im dig this one up... who here's swapped out ball valve that came with yours? the one that came with my amazon can seems to leak a bunch from the handle, it needs to be replaced and the valve seems to be a weird one.
  4. Geoffsfas10

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Drove mine about 2000 miles down to the Gulf Coast and back, then gave it a nice wash yesterday to get bugs and mud off the exterior, and vacuumed all the sand and road trip snack crumbs from the interior. Tahoe did good, first time driving it that far since the DoD delete, averaged just under...
  5. Geoffsfas10

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Speaking of fluid changes... those who have changed trans fluid, is it really as much of a pain in the ass as it seems or is it more just a mess? Id like to do it before roadtripping it a good 2k or so
  6. Geoffsfas10

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    washed it a couple days ago cause I needed the 40% chance of rain to actually happen. Then today I changed the oil since the DoD swap. Little bit of break in oil was still left in there I guess. Also I love the 60 lbs of oil pressure now haha.
  7. Geoffsfas10

    Woodgrain Trim Options.

    I wrapped mine
  8. Geoffsfas10

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    LED will work if you get the right one. In some cases theres an A and B orientation you can buy, one is for projecters and the other isnt. Lets just retrofit them. :superhack:
  9. Geoffsfas10

    2012 Rear Escalade Bumper With Dual Tips - Part numbers

    Thats turned out REALLY nice! Love the dual corsa tips too
  10. Geoffsfas10

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    goodness!! There was one time when I cheaped out with my Sierra, and didnt go after the OEM pads, and those were toasted in like 30K, and thats weird for me since I am not heavy in the foot
  11. Geoffsfas10

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    the OEM brakes on most fullsize GM trucks are 100k rated at a minimum. I just changed from fronts at 104K and they were just shy of the warning tabs, the rears were changed right around 100. My Sierra was the same way.
  12. Geoffsfas10

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Pulled the passenger front wheel and replaced the siezed up caliper slide pin i found when i did brakes last weekend. surprisingly, getting the old pin out wasnt that bad
  13. Geoffsfas10

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    yeah but why make things easier? hahaha. it was fine with the wheels off, I have my old floor jack from building off road trucks at my house now so it was easy enough.
  14. Geoffsfas10

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    I did what someone did a few pages back, installed a full set of the Husky Mud/Splash Guards today. What a pain in the ass, having to pull the rear wheels off, but I got it done.
  15. Geoffsfas10

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    10/10 interested...sent you a message
  16. Geoffsfas10

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    what truck is it from? i so want one of those but i dont like the denali one with the wood, i want that wheel you found!
  17. Geoffsfas10

    Your Vehicles as they sit now....

    Its dirty but its how it sits now....
  18. Geoffsfas10

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Put the black badges on this morning, changed the front brakes this afternoon.
  19. Geoffsfas10

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Plastidipped the 'TAHOE' badges on the doors, wanted to see if I'd like it enough to order some proper black emblems, and Ive decided that black emblems are in the future. The good news is the dip was having a hard time sticking with the ceramic coating on it haha. also painters tape didnt want...
  20. Geoffsfas10

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    I was wondering how those would look on a tahoe, looks great! i see them on the silverados in the neighborhood and they arent a bad looking wheel
  21. Geoffsfas10

    Does anyone offer a HID projector housing for the Yukon?

    my retrofit retained vertical adjustment with the stock headlight buckets. if you want an LED fixture, there are 2 options. Alpha Rex and Morimoto make a direct replacement LED fixture.
  22. Geoffsfas10

    Was it really a downgrade?

    ive been lookin for those brakes since mines gonna need fronts soon but they dont exist haha
  23. Geoffsfas10

    What did you do to your NNBS GMT900 Tahoe/Yukon Today?

    Washed my wife's equinox today, first time since possibly October last year. Poor car, was so dirty, the suds were dripping off grey. After it was clean, it made the tahoe look pretty bad so I washed it as well...first time since...mid November or so. All the shop grunge is off it now and its...
  24. Geoffsfas10

    Any decent LED fog light options out there?

    I have these from Morimoto https://www.theretrofitsource.com/chevrolet-round-morimoto-xb-led-LF-CHEVROUND?quantity=1
  25. Geoffsfas10

    Yay! Another headlight thread. Alpharex opinions?

    cut off from them is meh at best for that price Also, take a gander at this thread, has lots of other pictures and info for ya https://www.tahoeyukonforum.com/threads/installed-alpharex-nova-headlights.114781/

Forum statistics

Threads
125,898
Posts
1,756,992
Members
87,789
Latest member
STEVEP21

Latest posts

Top