Search results

  1. Trey Hardy

    2013 Chevy Tahoe LTZ

    I second this though^^^ if your on a budget some bilsteins and jeep rear sway bar links would make a considerable difference keep us posted as what you decide to do and how it worked out for you if it resolved your issue or not
  2. Trey Hardy

    2013 Chevy Tahoe LTZ

    They also have dummy sensors that will plug into the Auto ride to trick the sensors. I diddnt care about the lights as my dash is lit up like a Christmas tree what’s one more light going to hurt! Lol
  3. Trey Hardy

    2013 Chevy Tahoe LTZ

    Sounds like the lift is stretched out so your uca may be bottoming out? Are the bump stops cut out already? I had the same issue I put bilsteins on my Silverado and they ride good I did icon coil overs on my Tahoe and used spacers to stretch the 6” lift to a 8” and between the coil overs and the...
  4. Trey Hardy

    In need of a recommendation for center console tablet 2011 Chevy Tahoe z-71 2LT

    It shouldn’t no I however haven’t done a tablet install but I’ve done plenty of single and double din installs with no issues I always hard wired/spliced the harness with the original radios harness It’s never given me any issues
  5. Trey Hardy

    24x14 Offroad Wheels On An AT4

    I’ve had them since march of last year mainly highway miles probably close to 50k miles give or take all even wear I ain’t even rotated them once since I got them put on lol it’s been a busy year
  6. Trey Hardy

    Post what y'all tow with your Tahoes, Yukons, and Suburbans!

    All harbor freight balls too the 25$ special hahahaha
  7. Trey Hardy

    Post what y'all tow with your Tahoes, Yukons, and Suburbans!

    Yep that’s a pretty good picture! got to do what you gotta do to get the job done son pjs 4.8 above he bent the frame pulling this kubota so when we went to our farm buddy’s land to make the dump for the day we unhooked the trailer picked his truck up by the Reese hitch about 8-10 ft in the...
  8. Trey Hardy

    Post what y'all tow with your Tahoes, Yukons, and Suburbans!

    Ah it rubbed a bit going over the bridges but not as bad as what you would think by the looks of it
  9. Trey Hardy

    Post what y'all tow with your Tahoes, Yukons, and Suburbans!

    The most I’ve put old faithful pulling Between the trailer 4500lbs and the pallets full of sod weighing around 3500lbs a piece it was a whopping 15,000lbs just about She did not like it but hauled it 1.5 hr away like a champ! Diddnt break 50 though lol
  10. Trey Hardy

    Rear U joint replacement

    You can do it with a socket and a c clamp but it’s a biotch for sure. If you got a buddy or shop with a press it would be much easier to just unbolt it from the yoke pull it out and take it up to the shop. Last time I tried the c clamp idea it made a 30-45 min job turn into a 4 hour job and had...
  11. Trey Hardy

    2008 5.3/4l60e 3-2 downshift flare. Corvette servo? Extended servo pin?

    I’m not sure it’s supposed to have a stronger hold on the 2-4 band that’s about all I know lol
  12. Trey Hardy

    2008 5.3/4l60e 3-2 downshift flare. Corvette servo? Extended servo pin?

    Try either a corvette servo or the slightly better sonnex servo that may help. I had to go back and fourth with my tuner when I done the Tahoe it was super sluggish then would shift too hard whenever stabilitrac would go off we tuned that out tweaked it some more and she’s perfect now I ended up...
  13. Trey Hardy

    Going for 400K!

    welcome from Nc! Expect some minor repairs here and there but she will keep on trucking with proper care! I got a family of chevys to my house between my 3 (210,000)(240,000) and 350,000) just about on my tahoe In-laws got 365,000 on his burb and 220,000 on the vette and uncle Jason has close to...
  14. Trey Hardy

    Lifted 2013 Yukon slt 4x4

    Yes 6x5.5 is our lug pattern
  15. Trey Hardy

    Faded/Oxidized Paint Question.

    I second that^ I’ve removed moldings for multiple trucks of my own and friends 60$ to get a harbor freight variable speed buffer 2-3 different cutting pads and some meguires polishing compounds and it’ll be looking as good as new Probably won’t be perfect but you won’t notice
  16. Trey Hardy

    5.3 DoD Delete Stock Replacement Cam -- What's the Verdict

    I got a 3 bolt cam in my 07 out of a 99 Silverado I got used from a buddy all you need is the adapter for it and it’ll work just fine
  17. Trey Hardy

    Largest tires on 20'' wheels

    Thanks buddy I appreciate it. She cleans up good for a old 350,000 mile pig
  18. Trey Hardy

    24x14 Offroad Wheels On An AT4

    That was the other set I was looking at getting before I got the venoms. I had the mt1 on my 22” mavericks and was curious to how the mt2 rode and lasted compared to them they definitely look more aggressive! Just out of curiosity where are you located and what do you want for them?
  19. Trey Hardy

    Tires rubbing after lift and spacer install

    Hey just remember at the end of the day if you ain’t SCRUBBIN YOU AINT THUGGIN lol
  20. Trey Hardy

    Brakes for 2019 Denali

    I don’t know for certain but I have a good idea that they do. They made some changes in the suspensions over the years but come to find out ALOT is still the same When I did my suspension lift on my 07 Tahoe I got it used off Craigslist it came off a 2019 Silverado the coil overs I ordered off...
  21. Trey Hardy

    Tires rubbing after lift and spacer install

    Chevys square fender wells is what makes it so hard to clear anything bigger than stock. Notice you see stock fords and dodges with 37s and no lift at all but we rub like crazy when we simply step up to 33s So therefore the only real option if your looking to run bigger wheels is to trim the...
  22. Trey Hardy

    Largest tires on 20'' wheels

    With stock wheels you can clear 33/12.50s With a 2-3” leveling kit you can clear 35/12.50s with minimal trimming You may run into an issue with the tires rubbing the upper control arms just throw some 1/4” wheel spacers on the front from AutoZone or Amazon. When my Tahoe was “lowered” I was able...
  23. Trey Hardy

    Tires rubbing after lift and spacer install

    Yea my wife complained about no steps after I lifted it I thought to get some n fab hoop steps at some point but I don’t need them personally and my daughter is old enough she can climb in and out now so it’s ok the wife never drives it anymore anyways since we got her car. If the end caps on...
  24. Trey Hardy

    Tires rubbing after lift and spacer install

    You may have to trim your steps some also by the looks of it or remove them completely if that’s a option you might consider. I cannot find a good picture up close of how I did mine this is a old pic from before I did the lift kit but you can zoom in and somewhat see where I cut the fender...
  25. Trey Hardy

    Tires rubbing after lift and spacer install

    Might sound bad but you have to hack out a triangle shape out your inner fender/cab corner They call this a NorCal mod It’s brutal cutting away and beating your ride in with a hammer but it’s not where it’ll ever be seen I’ve had to do this to every vehicle I have because I run the 14 wide...

Forum statistics

Threads
124,146
Posts
1,727,771
Members
85,726
Latest member
bsully456

Latest posts

Top