Rule of thumb, look at the leads on the LED the longer one (anode) is your positive side of the LED
LED Makeover (Several pics.)
- Thread starter diffrnt
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Rule of thumb, look at the leads on the LED the longer one (anode) is your positive side of the LED
chauncey0337
Full Access Member
Hey, diffrnt, did you use flat top leds or round leds? In some of the pics it looks like you used flat top but it"s hard to tell so I thought I'd ask.
All of the leds were round, but I used a dremel to sand down some of the tops. It help to diffuse the light instead of a pinpoint beam.
B0$$MAN
Boss of all Bosses
What exact LED's did you use? I want to order them from superbrightleds.com so that I can do this myself.
Also, what kind of LED would go in the cup holder lights socket?
Also, what kind of LED would go in the cup holder lights socket?
I bought 100 5mm leds with 460 ohm resistors off of ebay. I'm not sure what you mean about the cup holder light socket.
B0$$MAN
Boss of all Bosses
Thanks!
In the cup holder of Denali's (not sure about suburban or Tahoe's) they have little clear lenses where the lights illuminate the inside of the cup holder. I wanted to know what kind of lights go there.
Don't have cup holder lights in my truck, so I wouldn't know.
B0$$MAN
Boss of all Bosses
I just bought 100 Cool White LED bulbs with resistors for $7.99 Plus free shipping. Should be a fun project!!
