Is this a repair or a retrofit?
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Repair.
I believe the struts are too weak. I can hear the motor run and the gate unlocks but will not raise. Last year i put a new gear on it so i know that is good.
I believe the struts are too weak. I can hear the motor run and the gate unlocks but will not raise. Last year i put a new gear on it so i know that is good.
lowh07
Full Access Member
- Joined
- Dec 1, 2017
- Posts
- 441
- Reaction score
- 1,755
Got the block back!
my road magnet picked up some more metal, while that was being patched (luckily) I usually take the opportunity to inspect my brakes and etc and found only one of the parking brake cables was going thru the brace/bracket and was rubbing on the gas tank a smidge so corrected that.
Somebody made a right turn into me on the highway last night. Rubbin is rac'n. I took the cash settlement offer.
how much? that's a $500 job at a shop, minimum
$500
tranmission fluid and both filters changed. I always forget just how much 12qt of tranny fluid really is. almost over flowed my oil drain tank. weird hybrid things haha, no tc mean all 12qt drains out for a filter change. well 2 filters.
did oil and filter while up too.
183k and counting. fingers crossed for the tranny and lifters haha.
did oil and filter while up too.
183k and counting. fingers crossed for the tranny and lifters haha.
Got the lumbar support changed out today and it sure is nice to have that fixed
Also put on a new seat cover. Kind of a pita to get it snapped into the clips in the foam but alls good now.
Also put on a new seat cover. Kind of a pita to get it snapped into the clips in the foam but alls good now.
need to do my bottom cover also, the foam seems ok but I have a new one anyway did you pull the seat out or do it with the seat still in.
Pulled it out. I could not imagine doing it installed.
supposedly it can be done with the seat in..... but I would imagine it would not be easy
It only takes maybe 5 minutes to take it out.
I have had the drivers bottom cover and foam sitting here for probably 3-4 years. I only bought the drivers bottom but now I want to do both sides and the 2nd row but money dictates otherwise.
had my off spring polish the wheels, did a better job than I expected. He wanted video game credits so.. it worked out
Man i understand the fund's problem!
Tonyrodz
Resident Resident
That metal is really sharp.
he asked me how old the wheels are I said 14 years, he's 14 lol but I ya i am impressed the oem chrome is till holding up there was some really superficial rust/pitting in a couple spots it came right off with good ol'e turtle wax chrome polish, anything else is small dings or scratches.
or it covered it up one of the two.
the caps are plasti-chrome they could probably be cleaned up more with a small brush maybe, stupid things are about $40 each used. If I take it anywhere to be worked on I pull the covers and put them inside so they don't get broken, tossed, lost.
Thinking about ordering these. Having a hard time deciding.
