22 Tahoe/Rear bumper valance
- Thread starter ScottHa
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
TXARKITEKT
TYF Newbie
- Joined
- Dec 28, 2021
- Posts
- 1
- Reaction score
- 1
Did this and it was decently easy. There is a DIY rear valance removal post here.
www.tahoeyukonforum.com
The part number for the dual exhaust is 84751055.
Need to make sure to have an exhaust shop add a hangar for the driver's side tailpipe.
Did a Corsa Sport cat-back system with black tips--looks killer. Also would recommend a CAI. The Corsa sounded good, but the Roto-Fab Big Gulp CAI made everything sound waaaaay better.
Rear bumper lower trim piece?
Does anyone know if the lower (unpainted) trim piece on the rear bumper is interchangeable between trim packages. I have a 2021 LT and would like to add the trim piece from a premier or high country to gain the cut outs for dual exhaust. My plan is to remove the stock muffler and replace it with...
www.tahoeyukonforum.com
Need to make sure to have an exhaust shop add a hangar for the driver's side tailpipe.
Did a Corsa Sport cat-back system with black tips--looks killer. Also would recommend a CAI. The Corsa sounded good, but the Roto-Fab Big Gulp CAI made everything sound waaaaay better.
nick14226
Full Access Member
- Joined
- Nov 22, 2019
- Posts
- 211
- Reaction score
- 210
Corsa actually has the parts list right in their listing for the conversion to DRE. No need to weld, the OEM hangers bolt right up.
Similar threads
