02 Base for my son

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Scott in AZ

Full Access Member
Joined
Mar 23, 2023
Posts
190
Reaction score
334
Location
Arizona
You can take the haze out of the headlights with some 3M plastic compound/polish. I usually sand 1st, go down in grits, polish them out, then use a 2 step UV liquid protectant that dries.
I use the Meguiars 3-step kit for headlamps. Have had a lot of success. Comes with 1000 grit sandpaper, 3000 grit, Velcro sanding block, a drill-mount buffing wheel, polishing compound and the UV sealant in a kit. One kit will cover multiple cars.

I recently swapped to those same Sealight LED bulbs. Driver side high beam failed in a month. On the mirror image picture below you can see the passenger side high beam bulb is only half illuminated. I emailed them and they sent me a new replacement right away, is in transit. Good service response.
 

Attachments

  • 1D073C3A-565F-4637-8381-D99A75208899.jpeg
    1D073C3A-565F-4637-8381-D99A75208899.jpeg
    252.4 KB · Views: 4
  • D06A7E51-9B51-40FF-8CC4-A749153ABA22.jpeg
    D06A7E51-9B51-40FF-8CC4-A749153ABA22.jpeg
    274.8 KB · Views: 4
Last edited:

Forum statistics

Threads
128,781
Posts
1,805,301
Members
91,760
Latest member
MyCleftNut

Latest posts

Top