My 2010 PPV

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
A

AV2010PPV

TYF Newbie
Joined
Mar 13, 2023
Posts
29
Reaction score
51
The project keeps going. Added an SLP exhaust and vent shades. Used some Adam’s tire polish and interior detail to clean her up as well.
 

Attachments

  • 207422DD-05AC-4223-96F7-13344D8D05F6.jpeg
    207422DD-05AC-4223-96F7-13344D8D05F6.jpeg
    300.7 KB · Views: 15
  • FB6C9A60-A559-40A6-9E13-022F1FA4826F.jpeg
    FB6C9A60-A559-40A6-9E13-022F1FA4826F.jpeg
    457 KB · Views: 13
  • AE49B5D3-5C9A-4E93-BA24-061CF3F43A93.jpeg
    AE49B5D3-5C9A-4E93-BA24-061CF3F43A93.jpeg
    388.8 KB · Views: 15
  • 106F87BB-051E-462E-BD61-15BB8714D301.png
    106F87BB-051E-462E-BD61-15BB8714D301.png
    1.9 MB · Views: 13
  • 770EA550-F42E-4607-AE3B-E09CE166A40D.jpeg
    770EA550-F42E-4607-AE3B-E09CE166A40D.jpeg
    322.3 KB · Views: 12
OP
OP
A

AV2010PPV

TYF Newbie
Joined
Mar 13, 2023
Posts
29
Reaction score
51
Decided to do some more maintenance. Noticed that the rear pad was eating at the rotor so decided to swap on all new pads and rotors. Easy project and the car stops significantly better. Also decided to swap in a new battery and new upgraded starter. While I was doing that I saw that one of the sway bar links was broken so I swapped in new ones. Car runs like a champ now.
 

Attachments

  • 9C1B5CA3-4182-4C53-BA82-C06108E415B2.jpeg
    9C1B5CA3-4182-4C53-BA82-C06108E415B2.jpeg
    424.2 KB · Views: 16
  • 76A540D1-965F-488F-98C1-930E6542D57B.jpeg
    76A540D1-965F-488F-98C1-930E6542D57B.jpeg
    402.8 KB · Views: 16
  • 5F9CD9F4-365B-44B7-85C1-A01F1756D87E.jpeg
    5F9CD9F4-365B-44B7-85C1-A01F1756D87E.jpeg
    144.2 KB · Views: 16
  • B80D07BD-20AB-4217-B3ED-8E9FB4FD27F0.jpeg
    B80D07BD-20AB-4217-B3ED-8E9FB4FD27F0.jpeg
    274.2 KB · Views: 13
  • 19AFC67D-C544-420A-B70C-0DB8512297ED.jpeg
    19AFC67D-C544-420A-B70C-0DB8512297ED.jpeg
    295.1 KB · Views: 14
OP
OP
A

AV2010PPV

TYF Newbie
Joined
Mar 13, 2023
Posts
29
Reaction score
51
Part 2.
 

Attachments

  • 469488D5-6FA3-41A9-8185-F14B107D7651.jpeg
    469488D5-6FA3-41A9-8185-F14B107D7651.jpeg
    276.4 KB · Views: 14
  • 2B88E62E-2CAA-445D-8A95-ACA63A142973.jpeg
    2B88E62E-2CAA-445D-8A95-ACA63A142973.jpeg
    267.1 KB · Views: 15
  • E0786ADF-639E-4BE5-AAEE-ABEDB3C823C0.jpeg
    E0786ADF-639E-4BE5-AAEE-ABEDB3C823C0.jpeg
    799.4 KB · Views: 15
  • 4BD2F6F6-32BD-46A9-995A-39E7FC83AB50.jpeg
    4BD2F6F6-32BD-46A9-995A-39E7FC83AB50.jpeg
    372.6 KB · Views: 16
  • 635C4C8B-8A8B-4748-BAFF-478CEA998745.jpeg
    635C4C8B-8A8B-4748-BAFF-478CEA998745.jpeg
    386 KB · Views: 15

Justinthewoods

TYF Newbie
Joined
Oct 14, 2023
Posts
18
Reaction score
24
Location
Denver, Colorado
Sort of new to the forum but have surfed it a lot while looking for parts for my 2010 Tahoe PPV. I bought the car a few months ago with 150k miles but only 3k engine hours. I love this car and have replaced the following so far:
- New headlights with led bulbs
- New smoked fog lights. Had to hardwire in a switch.
- New GoRhino buddy bumper
- New OEM grilles
- Dipped the front and rear emblems black
- Dipped the oem mirror caps gloss white
- New OEM tail lights
- New spare tire cover dipped white
- New center caps and performance tires
- 50% tint on windshield and 15% on all sides

On the interior I did the following:

- New dash cover for cracked dash
- New steering wheel surround and emblem
- New radio screen with Apple car play and reverse camera
- Carbon fiber wrap on wood grain
- Used OEM leather seats. New seat cushion foam and cover on drivers seat.
- Wrapped the center seat in oem-type leather
- New A-pillar trim to replace cut old trim.
-Hardwired V1
-New rubber floor lining.


I then fully detailed the inside and outside. I replaced thar majority of the bulbs on the interior and exterior with LED bulbs. I replaced the oil, battery, and intake filter as routine maintenance as well. Here are some pictures:
I love the carbon fiber wrap you did over the fake wood!!! Could you explain how you did that possibly? Would love to do that in my 2010 Tahoe too! Thanks buddy, the car looks great!!!
 

Jimgeorge

Member
Joined
Mar 1, 2022
Posts
58
Reaction score
27
Location
Florida
Tell me about it. I used a 24” breaker bar because I didn’t have an impact wrench at the time.
Where did you find the oem hitch and how much did you pay for it? 400+ seems like a lot to pay for a used piece of steel on EBAY.
 

Forum statistics

Threads
128,788
Posts
1,805,474
Members
91,771
Latest member
mimi66972
Top