Lifted/Leveled 2021 - Postem Up

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ProfeZZor X

Full Access Member
Joined
Jan 19, 2022
Posts
455
Reaction score
377
Location
High Country
What’s the offset on those?? That’s a good looking Yukon. What’s kind of rubbing and trimming did you need to do?
The offset on my 24x14's are -76. I knew what I was getting into a couple of years ago before I even ordered these wheels. I just didn't like the "flush" look on current gen Yukon/Tahoes, and wanted to do something different. I did have to cut away some of the wheel well closer to the bottom, but otherwise, it turns just fine.

The only thing I'm waiting for now is for my current tread to wear down so I can upgrade my tires to 35's. I should have done it the first time around, but I found myself listening to too many haters and decided to play it safe by getting 33's.
 

A10MileHusker

Member
Joined
Jul 24, 2022
Posts
32
Reaction score
29
I'm not sure the specifics of your ride (I have a 22 Yukon AT4 w/ Magnaride) and I missed the memo that you need the Magnaride relocation bracket. So I just ordered that and now delayed another week until that arrives.

Just wanted to give a heads up to you and anyone who might be considering this.

No you dont. At least not with my wifes ‘22 high country.

Post pics of the bracket…links…or whatever it is. I couldnt even find it when i installed the kit on hers.


To update this, Went to install my Motofab 1" level lift on my 22 and confirmed I did NOT need the bracket that Motofab said I did.

But do love the 1". Leveled my AT4 perfectly.
20230410_105713.jpg
 

H1Chester

Full Access Member
Joined
Nov 20, 2021
Posts
251
Reaction score
151
To update this, Went to install my Motofab 1" level lift on my 22 and confirmed I did NOT need the bracket that Motofab said I did.

But do love the 1". Leveled my AT4 perfectly.
View attachment 396606

Your AT4 should have come level from the factory. My 2022 Z71 did. Rear wheel well is only .25” higher than the front on stock non air ride.
 

A10MileHusker

Member
Joined
Jul 24, 2022
Posts
32
Reaction score
29
Your AT4 should have come level from the factory. My 2022 Z71 did. Rear wheel well is only .25” higher than the front on stock non air ride.
I can't keep it all straight. I talked with another company who said the same thing, your AT4 is already lifted and lifting more will cause more stress on CVs.
But there was no way mine was.
 

H1Chester

Full Access Member
Joined
Nov 20, 2021
Posts
251
Reaction score
151
I can't keep it all straight. I talked with another company who said the same thing, your AT4 is already lifted and lifting more will cause more stress on CVs.
But there was no way mine was.
@A10MileHusker i honestly didn’t believe it at first. Last year I read a post on a thread on this forum that said that the Z71’s come from factory already level. I went out to my driveway and checked myself. I only have a quarter inch of “rake”. I would have to dig for the thread (maybe earlier on this very thread) but a few other members chimed in saying they measured their stock rigs and same, only about .25” difference. The people who put a front level on their rig were puzzled that the front was now slightly higher than the rear… So yes you can lift your truck but a front level on a 21+ Z71 = “Carolina Squat”.
 

Nokturnal

Full Access Member
Joined
Jul 25, 2018
Posts
154
Reaction score
169
3.5 RC
Amp steps
20x9 Fuel Quakes (+1mm)
35x12.5x20 BFG KO2
Chrome delete (minus front Chevy and rear bow tie)
Painted tow hooks and skid plate
Debadge
5% Ceramic Tint
 

Attachments

  • B2FBFC32-A004-477C-9C25-2E8CA9BD1364.jpeg
    B2FBFC32-A004-477C-9C25-2E8CA9BD1364.jpeg
    391.1 KB · Views: 90
  • 7D38248A-BB13-4C5F-8FD7-C8009FA4EAA5.jpeg
    7D38248A-BB13-4C5F-8FD7-C8009FA4EAA5.jpeg
    364 KB · Views: 90
  • D4BFFA92-2570-459D-B24A-9397767D6ECE.jpeg
    D4BFFA92-2570-459D-B24A-9397767D6ECE.jpeg
    481.3 KB · Views: 82
  • C091238F-62F2-4381-B5BB-89549DABEEF0.jpeg
    C091238F-62F2-4381-B5BB-89549DABEEF0.jpeg
    294.4 KB · Views: 89

Nokturnal

Full Access Member
Joined
Jul 25, 2018
Posts
154
Reaction score
169
More pics
 

Attachments

  • 2E8F422B-0A0A-4436-AC07-725167B016CE.jpeg
    2E8F422B-0A0A-4436-AC07-725167B016CE.jpeg
    101.2 KB · Views: 62
  • 23C1D18C-6E19-4CC4-A0C7-CA3E16E10F9F.jpeg
    23C1D18C-6E19-4CC4-A0C7-CA3E16E10F9F.jpeg
    292.9 KB · Views: 51
  • B8B87DCF-69A6-4C14-A0A6-783D9136B204.jpeg
    B8B87DCF-69A6-4C14-A0A6-783D9136B204.jpeg
    482.4 KB · Views: 57
  • 1B790B8A-1080-4843-8AFE-E24C6A3C1E4D.jpeg
    1B790B8A-1080-4843-8AFE-E24C6A3C1E4D.jpeg
    521.5 KB · Views: 53
  • 8B1D17C2-1D30-497E-A4F4-8472C0124001.jpeg
    8B1D17C2-1D30-497E-A4F4-8472C0124001.jpeg
    413.3 KB · Views: 52

Nokturnal

Full Access Member
Joined
Jul 25, 2018
Posts
154
Reaction score
169
Fenders trimmed and one more of powder coated Quake. Zero rub.
 

Attachments

  • 962BC1DA-E08E-4331-9090-ABDE96364692.jpeg
    962BC1DA-E08E-4331-9090-ABDE96364692.jpeg
    374.6 KB · Views: 46
  • 94A52AF0-78B5-4A07-9169-677613FA0038.jpeg
    94A52AF0-78B5-4A07-9169-677613FA0038.jpeg
    391.8 KB · Views: 45
  • 28892C7F-B85D-4199-B945-E64DA23C3335.jpeg
    28892C7F-B85D-4199-B945-E64DA23C3335.jpeg
    390.7 KB · Views: 45

Nokturnal

Full Access Member
Joined
Jul 25, 2018
Posts
154
Reaction score
169
Didn’t realize how easy it is to pop off bow ties with interior trim tool! Black out complete front and back.
 

Attachments

  • 458E09A1-6F60-4F79-B473-E9BA8099A95C.jpeg
    458E09A1-6F60-4F79-B473-E9BA8099A95C.jpeg
    246.4 KB · Views: 45
  • 219AA61A-ABAD-446C-8467-FFAF9A6FA332.jpeg
    219AA61A-ABAD-446C-8467-FFAF9A6FA332.jpeg
    432.6 KB · Views: 44
  • 05948169-75E5-4642-9DEB-C6FD39208A75.jpeg
    05948169-75E5-4642-9DEB-C6FD39208A75.jpeg
    314.2 KB · Views: 42

Forum statistics

Threads
128,786
Posts
1,805,365
Members
91,765
Latest member
AT4Hunter

Latest posts

Top