OP
OP
Auto folding mirror mod - Anyone?
- Thread starter MDC9966
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
kbuskill
***CAUTION*** I do my own stunts!
If you used a timed latch relay then it should.
You would need the relay to stay latched for 3-4 seconds after it received the signal from the door locks.
You would also need a 12v+ and ground source.
But keep in mind that everytime your doors lock the mirrors would fold... so if you have it set up to lock the doors everytime the truck is placed in gear or at a certain speed then your mirrors would fold in.
Also you would have to hit the button to fold them out everytime as they wouldn't auto fold out just because the doors unlock.
You would need the relay to stay latched for 3-4 seconds after it received the signal from the door locks.
You would also need a 12v+ and ground source.
But keep in mind that everytime your doors lock the mirrors would fold... so if you have it set up to lock the doors everytime the truck is placed in gear or at a certain speed then your mirrors would fold in.
Also you would have to hit the button to fold them out everytime as they wouldn't auto fold out just because the doors unlock.
kbuskill
***CAUTION*** I do my own stunts!
Something like this would probably work...
https://www.amazon.com/Miniature-cy..._rd_t=40701&psc=1&refRID=5Y1J00YCP42H2YJT03XS
https://www.amazon.com/Miniature-cy..._rd_t=40701&psc=1&refRID=5Y1J00YCP42H2YJT03XS
OP
OP
MDC9966
Full Access Member
that's a good point, I thought about that and since the parking lights flash when I hit my remote to lock and when I do it to unlock. I thought about doing what you recommend, but jumping it from the parking lot flash?
The time and labor involved and parts far outweighs simply having the option programmed, on my 2012 Denali it is already a option in the DIC so I would think it can be programmed in.
kbuskill
***CAUTION*** I do my own stunts!
6 of 1 and a half dozen of the other...
If you installed 2 of the timed relays you could...
hook one to the fold in wire and the lock signal of the door lock actuator..
And hook the second relay to the fold out wire and the unlock signal of the door lock actuator.
kbuskill
***CAUTION*** I do my own stunts!
I agree whole heartedly... I was simply trying to answer the questions posed by the OP...
I would take advantage of the money being spent on reprogramming the BCM and have the turn signals programmed to be LED compatible at the same time as well as anything else I could think of that I wanted modified.
It's only about $200 to get the BCM reprogrammed so it's not very much in the grand scheme of things.
OP
OP
MDC9966
Full Access Member
Yes, it does make sense, I was hoping for a DIY solution. I saw this link: http://www.whiteautoandmedia.com/in...n=com_virtuemart&Itemid=54&vmcchk=1&Itemid=54
It looks like the BCM has to be sent to them. I"m going to look around for a local source near Charlotte. Maybe I'm lucky, worst case I still have a plan. Thank you guys.
It looks like the BCM has to be sent to them. I"m going to look around for a local source near Charlotte. Maybe I'm lucky, worst case I still have a plan. Thank you guys.
KidWgn
Certified Kid Hauler
For anyone finding this thread in 2023, I found the company that offers BCM programming now that White Auto and Media no longer does it...
www.btdieselworks.com
Custom BCM tuning (2007-2014)
GM Body Control Module tuning for the 2007-2014 Gas/Diesel Trucks and SUV’s NOTE: You must enter your VIN in the text box above NOTE: 2014/2015+ K2xx BCM tuning is temporarily suspended and unavailable. We hope to have new third-party options available soon. NOTE: If you already have an...
www.btdieselworks.com
Similar threads
