04 Tahoe wiper arm skipping

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mattt

Full Access Member
Joined
Mar 27, 2014
Posts
733
Reaction score
304
With all the rain we've been having in Socal recently, I've noticed that the driver's side wiper isn't doing a good job. At low speeds on the street, both wipers wipe clean, however, at highway speeds, the driver's side wiper is almost 'skipping'(for lack of a better word) across the windshield. I've been meaning to swap the wiper arms side to side to see if the problem moves with the arm, but I haven't figured out how to remove the washer nozzles attached to the arms.

I'm wondering if this points to a weak spring in the wiper arm, or something else? I've never thought about the wiper arm spring previously, but now think this might be it's function and purpose??? If so, is there a way to add tension to that spring to stop this skipping? Any other suggestions to get this wiper wiping clear and clean? Thanks.
 

OR VietVet

Multnomah Falls
Supporting Member
Military
Joined
Oct 8, 2014
Posts
19,067
Reaction score
31,163
Location
Willamette Valley
Can't adjust the spring tension and is not worth the hassle to try it. Wiper arms are not expensive. That is what I thought of first. Second, how old are the blades? Third, I highly recommend doing something I have done for years. Grit and grime build up on the glass. Glass is more porous than you think. Get the w/s wet, sprinkle Bon Ami on the w/s and use a clean rag to clean the glass. It is not abrasive and will not harm the glass, like something like Comet or Ajax would do. Rinse thoroughly and then I always use fresh paper towels to dry the glass. You can also get some stuff @Rocket Man recommended to me called Aqua Pel and follow instructions. That stuff works real good.
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
6,386
Reaction score
8,311
I'd look at the wiper mechanism under the cowl to see if there are any worn pasts that are 'catching' during the wiper cycle.
 
OP
OP
M

mattt

Full Access Member
Joined
Mar 27, 2014
Posts
733
Reaction score
304
Thanks, I will check both of those out as possible causes. Blades are relatively new and wipe clean at slower speeds. This is just a problem at highway speeds, which makes me think it is arm related. How are the washer nozzles attached to the arm, clipped on?
 

OR VietVet

Multnomah Falls
Supporting Member
Military
Joined
Oct 8, 2014
Posts
19,067
Reaction score
31,163
Location
Willamette Valley
Tell me what you are driving?

Never mind. I see the year in the post title. I missed that, sorry.
 

OR VietVet

Multnomah Falls
Supporting Member
Military
Joined
Oct 8, 2014
Posts
19,067
Reaction score
31,163
Location
Willamette Valley

You don't remove the washer clips or hose from the arm. It is all part of it. The hose comes out near where it is bolted on and has a little plug in plastic *** that plugs in at the cowl. Look and you will see. What can be tricky is removing the arm at the pivot. Use a battery cable end removal tool to make it easier.
 

Forum statistics

Threads
128,782
Posts
1,805,335
Members
91,761
Latest member
AlbertoTahoe2011
Top