Mother loving oil pressure sensor...

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

seatown

Member
Joined
Oct 18, 2018
Posts
33
Reaction score
24
08 Yukon oil pressure sensor... I’m sure you guys know the frickin deal here...

I got the wire undone and special socket on there...but I have tried a universal joint, flexible ratchet, extension, etc.. I don’t see how to do this without the manifold coming off...
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
25,961
Reaction score
50,621
Location
Oregon
08 Yukon oil pressure sensor... I’m sure you guys know the frickin deal here...

I got the wire undone and special socket on there...but I have tried a universal joint, flexible ratchet, extension, etc.. I don’t see how to do this without the manifold coming off...
You shouldn’t need anything other than an extension, maybe a wobble one, and to lay across the top of the engine. Make sure to check for a screen at the bottom of the hole after you get the sensor out. They can get clogged if it has one.
 

Fless

Staff member
Super Moderator
Joined
Apr 2, 2017
Posts
10,255
Reaction score
20,312
Location
Elev 5,280
You shouldn’t need anything other than an extension, maybe a wobble one, and to lay across the top of the engine. Make sure to check for a screen at the bottom of the hole after you get the sensor out. They can get clogged if it has one.

Ditto on the wobble extension; that's what I used on mine.
 
OP
OP
S

seatown

Member
Joined
Oct 18, 2018
Posts
33
Reaction score
24
Man... I used this set up attached each one at a time... got it out and the new one in...

Anddddddd oil gauge still at zero
09920D72-BC17-4DB1-92A5-ABAACE30A097.jpeg
 
Joined
Apr 11, 2018
Posts
6,288
Reaction score
12,267
Location
St. Louis
Man... I used this set up attached each one at a time... got it out and the new one in...

Anddddddd oil gauge still at zero
View attachment 373948
Where you getting a code (engine light) also?

When mine went bad I also had the check engine light come on with a code stating oil pressure sensor voltage out of range. I had to clear the code and restart the engine before it started showing correct pressure
 

Charlie207

Full Access Member
Joined
Apr 13, 2021
Posts
1,169
Reaction score
2,131
Location
LFOD, New Hampshire
I'm pretty sure mine started reading correctly after replacing the failed sensor, but the code was still present until I cleared it with via the Torque app.
 
OP
OP
S

seatown

Member
Joined
Oct 18, 2018
Posts
33
Reaction score
24
I didn’t try to reset and restart. From everything I saw the gauge should get going again.

But I took it back out to check the filter. Looks clean but I ripped it.8485AEF6-435A-4ED6-BDDE-CBD80C85C72D.jpeg
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
25,961
Reaction score
50,621
Location
Oregon
You should try a manual pressure gauge to verify the actual pressure.
 

Forum statistics

Threads
128,802
Posts
1,805,659
Members
91,785
Latest member
Eliteweapons
Top