Stuck in Neutral

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Sweet Pete

TYF Newbie
Joined
Jan 1, 2020
Posts
25
Reaction score
31
My apologies upfront for a lack of searching old posts on my end.

As I put the truck in reverse to back into the driveway to something happened, the shifter went limp, but the truck still reversed, but now seems to be in Neutral. The gear display says Reverse. I turned off the engine but it won’t try to turn over.

Any suggestions on the issue/ troubleshooting?
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
23,694
Reaction score
34,616
Location
Stockton, Ca.
you can order a piece to fix that
part # T74498-1A from fitzall
it's a nylon/plastic replacement part and seems to be the best one out there based on my experience
I tried a couple others and they did not work well at all.
 

Meccanoble

Full Access Member
Joined
Oct 3, 2016
Posts
1,166
Reaction score
353
Location
Georgia
For now, you can slip it back in if you have the gear in the right spot before it broke. But it will most likely pop back out when you change gears again. Truck tall enough you can slide down and just put it back until you get your part but not a temporary setup you want others to worry about :)
 

BG1988

Full Access Member
Joined
Nov 14, 2018
Posts
2,946
Reaction score
1,344
For now, you can slip it back in if you have the gear in the right spot before it broke. But it will most likely pop back out when you change gears again. Truck tall enough you can slide down and just put it back until you get your part but not a temporary setup you want others to worry about :)
i used bread twist ties,, a washer and a bushing.. quick fix been going good for a year + all ready..
 

Forum statistics

Threads
129,174
Posts
1,811,641
Members
92,268
Latest member
willie110hh
Top