Swagfu
Full Access Member
Anyone know if they ever made a driver's pillar handle or grab bar? If so, do you have a part number you can share. I would love one of these.
Driver pillar handle?
- Thread starter Swagfu
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
YukonGTmaster
Full Access Member
- Joined
- Mar 18, 2021
- Posts
- 468
- Reaction score
- 747
No factory driver “Jesus” handle on my 97 GT.
Swagfu
Full Access Member
I knew it was a long shot. I looked all over the internet and came up empty.
YukonGTmaster
Full Access Member
- Joined
- Mar 18, 2021
- Posts
- 468
- Reaction score
- 747
I used to have the Nerf side step bars to jump up into my rig, but like all of them they just rusted so badly I had to take them off. The passenger side got the handle but not on the driver’s side.
I have a short memory, I've had the passenger handle off on these trucks before but can't remember how they are attached to the pillar. I would pull the passenger side handle and look at how the trim is cut and how the handle attaches. If it's got threads in the pillar post you can use a nutsert and do it yourself. I'd bet the passenger handle can be installed on the drivers side even if you had to flip it over.
Similar threads
