AT4 3D Printed Items Thread

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

WalleyeMikeIII

Full Access Member
Joined
Feb 22, 2022
Posts
1,931
Reaction score
1,490
Location
Sunny and Snowy Minnesota
Going the non-trim referenced on knobs; printing stock now; will be onsite this weekend.
I hope yours are better looking than the ones referenced...as I think those looked pretty bad...I get it, they covered the chrome..but they really didn't look all that great to me...to each their own...but my recommendation is a little less bulk, or at least some chamfer on the edges or something...

P.S. Why is it I don't really mind chrome and there is a piece of the Tahoe/Esky/Yukon crowd that seems to get nausea a the sight of anything shiny?
 
OP
OP
Fast_AT4

Fast_AT4

RWM +1
Supporting Member
Joined
Mar 26, 2022
Posts
869
Reaction score
1,259
Location
SW Florida
I hope yours are better looking than the ones referenced...as I think those looked pretty bad...I get it, they covered the chrome..but they really didn't look all that great to me...to each their own...but my recommendation is a little less bulk, or at least some chamfer on the edges or something...

P.S. Why is it I don't really mind chrome and there is a piece of the Tahoe/Esky/Yukon crowd that seems to get nausea a the sight of anything shiny?

Not much flexibility in reference to the design aspect to keep it not bulky due to being fit over an existing item. You can see my design in the below IG or TikTok link.
 
OP
OP
Fast_AT4

Fast_AT4

RWM +1
Supporting Member
Joined
Mar 26, 2022
Posts
869
Reaction score
1,259
Location
SW Florida
Fender emblem needs a bit of work View attachment 368266

This was a REV1 but have switched up gears a bit as far as how I want it. Was trying to conform to the existing design...but I want it to stand out a bit more than OEM +light feature. Plate is pretty full this moment for this and a few other projects...but will not be forgotten about.
 
Top