What did you do to your NBS GMT800 Tahoe/Yukon Today?

MADPINTO08 said:

It actually wasn’t bad at all. I have been in auto collision for the past 15 years so I tried something with the vinyl that I usually do with factory decals.. have a bucket of fresh water and put 2 to 3 DROPS of DAWN dish soap… throw a brand new micro fiber rag in with it and buy a brand new plastic spreader… After cleaning the area you’re going to wrap very good with a whole different set of cleaning material you can then start to separate the wrap from the paper and just start soaking the roof with the clean water and also the wrap. This will let u be able to move it around a little and not just stick to the first place it touches.
Also I have done my homework and it is the exact same stuff that is triple in price. I bought the vinyl at hobby lobby it’s a whole lot cheaper and it’s the exact same product. Perfect for DIY projects.
Hope this helps.

Click to expand...

iamdub said:

I'm really considering doing gloss black on mine when I weld up the roof rack holes. Might even go full Euro and do the hood.

Thanks for passing along that tip about the Hobby Lobby vinyl. Is it wide enough to cover or do you have a seam(s)?

Click to expand...

iamdub said:

I'm really considering doing gloss black on mine when I weld up the roof rack holes. Might even go full Euro and do the hood.

Thanks for passing along that tip about the Hobby Lobby vinyl. Is it wide enough to cover or do you have a seam(s)?

Click to expand...

MADPINTO08 said:

I was actually considering the hood also but mixed emotions about it in my household

Click to expand...

iamdub said:

I'm really considering doing gloss black on mine when I weld up the roof rack holes. Might even go full Euro and do the hood.

Thanks for passing along that tip about the Hobby Lobby vinyl. Is it wide enough to cover or do you have a seam(s)?

Click to expand...

Timc9516 said:

Installed some new LED door lights. I put Led bulbs in the stock ones when I bought it but two of the lenses broke so I bought new ones on Amazon. Highly recommend them

LED Door Lights

Click to expand...

Tonyrodz said:

I think I might've figured out why it's running like crap once it's "warmed up". It's been going on for a few months now. When it's cold it runs fine, and once driving it's running really rough. You can even hear it in the exhaust. I noticed the temp gauge doesn't go past 160, even if it's been driven for awhile. I'm thinking the thermostat is staying open, not allowing it to go into closed loop--just a theory. I haven't been able to confirm the temp with the tech 2, but I'm pretty sure that's what's going on.
After driving for 20 mins--View attachment 366736
Opinions?

Click to expand...

Fless said:

Or, less likely, the engine coolant temp sensor is mis-reporting to the PCM.

Click to expand...