Dual Battery Setup using OEM parts?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tall56Dog

TYF Newbie
Joined
Jan 22, 2022
Posts
27
Reaction score
32
Hello, new guy here.

2020 Tahoe LT Z71 Midnight Edition, 5.3, 4wd

Truck isn't a PPV, but seems like this would be the best forum to ask about an OEM Dual Battery Setup.

I know there are many options, Straight Parallel, DCDC Charger, Aftermarket Isolator, but I want to keep everything clean using OEM parts.

I've already bought and installed the new battery tray and hold down, and a new Interstate AGM battery.

From the GM Parts Direct site, I'll also need Fuse Box 23239735, Negative Cable 84354710, Relay 12135194, and Positive Cable 84355668. Parts total about $250.00 with shipping.

I don't think this will be too hard to do, but I was hoping someone with a 2015-2020 PPV could post some pics showing how all the cables are run and relay connected.

Thanks!
 

Attachments

  • IMG_1027.JPG
    IMG_1027.JPG
    239.2 KB · Views: 109
  • IMG_1028.JPG
    IMG_1028.JPG
    234.7 KB · Views: 90
  • IMG_1029.JPG
    IMG_1029.JPG
    227.8 KB · Views: 99
  • IMG_1030.JPG
    IMG_1030.JPG
    187.6 KB · Views: 111
  • IMG_1031.JPG
    IMG_1031.JPG
    263.6 KB · Views: 121

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
23,409
Reaction score
34,035
Location
Stockton, Ca.
I haven't seen any write ups on it but it looks like this is the basic diagram, not sure how the isolation relay #9 ties in but the "fuse box" #5 is the 2nd battery positive connector with 100 and 50 amp fuse's, the negative cable #7 goes from 2nd battery terminal to block next to the temperature sensor, the positive cable #8 goes around the engine bay outside edges. #6 is the fuse box cover
auxx.JPG
 
OP
OP
T

Tall56Dog

TYF Newbie
Joined
Jan 22, 2022
Posts
27
Reaction score
32
I haven't seen any write ups on it but it looks like this is the basic diagram, not sure how the isolation relay #9 ties in but the "fuse box" #5 is the 2nd battery positive connector with 100 and 50 amp fuse's, the negative cable #7 goes from 2nd battery terminal to block next to the temperature sensor, the positive cable #8 goes around the engine bay outside edges. #6 is the fuse box cover
View attachment 361271
Thanks Wes!
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
6,394
Reaction score
8,322
Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

You are already receiving sage advice from the knowledgeable folks on this Forum.
 

BlackYukon

I'm kind of a Retard
Joined
Jul 27, 2016
Posts
256
Reaction score
271
Hello, new guy here.

2020 Tahoe LT Z71 Midnight Edition, 5.3, 4wd

Truck isn't a PPV, but seems like this would be the best forum to ask about an OEM Dual Battery Setup.

I know there are many options, Straight Parallel, DCDC Charger, Aftermarket Isolator, but I want to keep everything clean using OEM parts.

I've already bought and installed the new battery tray and hold down, and a new Interstate AGM battery.

From the GM Parts Direct site, I'll also need Fuse Box 23239735, Negative Cable 84354710, Relay 12135194, and Positive Cable 84355668. Parts total about $250.00 with shipping.

I don't think this will be too hard to do, but I was hoping someone with a 2015-2020 PPV could post some pics showing how all the cables are run and relay connected.

Thanks!
Feel free to document your progress on here. I'v been wanting to do the exact same thing, Just a simple, clean, oem looking dual battery setup.
 
OP
OP
T

Tall56Dog

TYF Newbie
Joined
Jan 22, 2022
Posts
27
Reaction score
32
For anyone interested in doing this, I've learned a couple things. First, before I forget, in addition to the parts I've listed above, you'll also need the positive battery post cover. Part # is 22945779. It has been discontinued, but you can still find them on Ebay. You'll also need the battery tray, and battery hold down, and bolt, parts # 2 and 3 in the pic in my first post. Part # for tray is 23231841, the hold down is discontinued, but you can get them on Amazon.

I realize this isn't for everyone, there are less expensive ways to do it. I just wanted to stay as OEM as possible. I mostly accomplished this with one exception. This is for my 2020 Tahoe, depending on your year, your configuration might be different, although I'm pretty sure 2015-2020 stayed the same.

I have no connection with them, but I like buying from GMPartsDirect, good prices and fast shipping.

The one exception I mentioned above, is that my truck didn't have the wiring connection for the Isolator Relay. GM must have decided to remove that wiring at some point unless it was for a PPV. What I ended up doing is just removing the relay and isolator from the new wiring harness, and then I bought a VSR (voltage sensitive relay) from Keyline Chargers. I actually like this better than the OEM relay and isolator, it's a cleaner install, and supposedly there is no parasitic voltage draw from the OEM Relay. So, if you decide to do this, you may not want to buy the "Accessory Power Relay", part # 12135194. I have a brand new one if anyone needs it as I can't return it.

Overall, I'm really happy with how it turned out. It's mostly OEM, with the Isolator being the only exception.

When you do this, the new positive battery cable (84355668) has both the positive cable for the fusebox, and the positive cable for the aux battery tied together in the same loom. You'll end up removing your existing positive cable and not reusing it.

If anyone has any questions, I'll try and answer as best I can.

I ended up making a bracket for the Keyline Isolator instead of mounting it directly to the firewall.
 

Attachments

  • IMG_1032.JPG
    IMG_1032.JPG
    269.1 KB · Views: 128
  • IMG_1033.JPG
    IMG_1033.JPG
    166.5 KB · Views: 121
  • IMG_1034.JPG
    IMG_1034.JPG
    246.9 KB · Views: 121
  • IMG_1035.JPG
    IMG_1035.JPG
    235.4 KB · Views: 126
  • IMG_1036.JPG
    IMG_1036.JPG
    228.2 KB · Views: 137
Last edited:
OP
OP
T

Tall56Dog

TYF Newbie
Joined
Jan 22, 2022
Posts
27
Reaction score
32
More pics.
 

Attachments

  • IMG_1038.JPG
    IMG_1038.JPG
    200 KB · Views: 105
  • IMG_1037.JPG
    IMG_1037.JPG
    239.5 KB · Views: 100
  • IMG_1039.JPG
    IMG_1039.JPG
    201.5 KB · Views: 117
  • IMG_1040.JPG
    IMG_1040.JPG
    212.7 KB · Views: 105

Forum statistics

Threads
128,790
Posts
1,805,507
Members
91,773
Latest member
wbhidalgo17
Top