GM Bi-scan for baby duramax?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Rangerdeepv

Member
Joined
Aug 16, 2021
Posts
40
Reaction score
26
Does anyone have a PID or program for th6e OBD2 Torque Pro compatible with the LM2 I6 Duramax?
 

Toasty

Full Access Member
Joined
Oct 4, 2020
Posts
260
Reaction score
132
Does anyone have a PID or program for th6e OBD2 Torque Pro compatible with the LM2 I6 Duramax?
what PID's arent reading? I have my 3.0 Yukon XL on order and do use Torque occasionally
 
OP
OP
R

Rangerdeepv

Member
Joined
Aug 16, 2021
Posts
40
Reaction score
26
Have tried torque, HP, boost, creating a Regen on/off, miles to regen and nothing reads. I can get torque for the most part but none of the rest. The Bi-scan has all the other Duramax motors but the LM2.
 

Toasty

Full Access Member
Joined
Oct 4, 2020
Posts
260
Reaction score
132
Have tried torque, HP, boost, creating a Regen on/off, miles to regen and nothing reads. I can get torque for the most part but none of the rest. The Bi-scan has all the other Duramax motors but the LM2.
There's a guy on youtube that posted a spreadsheet - ty these:

 
OP
OP
R

Rangerdeepv

Member
Joined
Aug 16, 2021
Posts
40
Reaction score
26
Tried these and all that shows is a steady number which never changes. Also cannot put 'lookup' in code as it chokes. Must be missing something real simple.
 

Toasty

Full Access Member
Joined
Oct 4, 2020
Posts
260
Reaction score
132
Tried these and all that shows is a steady number which never changes. Also cannot put 'lookup' in code as it chokes. Must be missing something real simple.
You went through and added all of the calculations/equations for the PID's in the spreadsheet?
 
OP
OP
R

Rangerdeepv

Member
Joined
Aug 16, 2021
Posts
40
Reaction score
26
The Regen state works and the soot level works great. The miles until regen stays steady and does not move.
 
Top