Did you ever try one of those?
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
it appears that autozone pads are likely made by BoschNRS Brakes Galvanized PadsMade in Canada
eh?
shop sku
NRS Brakes offers the best brake pads in the USA and Canada. The NRS Brake Pad is an innovative, patented design with a steel backing plate and coated surface. With over 30 years of experience, NRS is able to provide brake pads that outperform all other brands on the market. Shop today!nrsbrakes.com
The brakes are the most important part of your SUV
I would not install trust with china garbage esp when it comes to the most important part f the suv
CaptainAmerica1
Full Access Member
Did we just censor snow. Balling?! I mean eww but when In gods name would we need to censor that in any context that it would be used in this forum?!…
Tonyrodz
Resident Resident
Nifty little tool you have there.
George B
¯\_(ツ)_/¯
I have one I got years ago with a can of seafoam deep creep for cleaning intake manifolds. Its just a 3’ spray straw with several holes around the end and a plug so it sprays 360. If I had to replace it I would get this:
Woolwax Spray can Extension Wand by Kellsport https://www.amazon.com/dp/B00CLUGXF...abc_KVBSYSRYEC3RXF7M6WEG?_encoding=UTF8&psc=1
Sparksalot
Supporting Member
snow|Balling now it's disabled
RooTBeeRthe1st
Full Access Member
- Joined
- Jul 11, 2018
- Posts
- 1,024
- Reaction score
- 2,354
Manifold-cat flange studs had enough, threads magically disappeared. Thankfully O'Reilly's had dorman manifolds in stock.
That lil guy in the back could be why bank 1 is always leaner...
Grabbed it with vice grips and it just sheared off right inside the head... So it'll stay there until I pull the engine.
Finally got my wide band sensor in, I just need to wire up the module at some point.
FedEx finally dropped off my other lower control arm and expansion tank hose.
Through my resonator on the tail pipe(looks horrible) just tacked in place at the moment...didn't change drone as much as I thought, bit I'll leave it for the week to be sure.
Wonder if it would do more before the muffler.
That lil guy in the back could be why bank 1 is always leaner...
Grabbed it with vice grips and it just sheared off right inside the head... So it'll stay there until I pull the engine.
Finally got my wide band sensor in, I just need to wire up the module at some point.
FedEx finally dropped off my other lower control arm and expansion tank hose.
Through my resonator on the tail pipe(looks horrible) just tacked in place at the moment...didn't change drone as much as I thought, bit I'll leave it for the week to be sure.
Wonder if it would do more before the muffler.
Attachments
I just spent $23 thanks to you. They have those at the hardware store to use but it would be good to have at home.
alpha_omega
Full Access Member
Don’t worry, you’re not the only one with this issue. Bummer you couldn’t get it out of there with a set of vice grips. That’s the only thing that I’ve ever found to work besides welding a nut/bolt in place.
Attachments
Similar threads
