Lower control arm bolts 07suburban. Ltz

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

lee.solorzano

Member
Joined
Jun 28, 2015
Posts
87
Reaction score
50
I go to a few place looking for all the lower control bolts for my 07 suburban 2 snapped so changing all 4


Sent from my iPhone using Tapatalk
 

89Suburban

Bull in the china shop
Supporting Member
Joined
Jan 10, 2013
Posts
13,070
Reaction score
35,906
Location
SE PA
I go to a few place looking for all the lower control bolts for my 07 suburban 2 snapped so changing all 4


Sent from my iPhone using Tapatalk


That sucks. Were you still able to get them out without much hassle and they weren't frozen in place?
 
OP
OP
lee.solorzano

lee.solorzano

Member
Joined
Jun 28, 2015
Posts
87
Reaction score
50
That sucks. Were you still able to get them out without much hassle and they weren't frozen in place?
YeS but
They where bent that what madE them hard to come out. But now I need tO find new ones in parts stores. Have go to dealer


Sent from my iPhone using Tapatalk
 

Bill 1960

Testing the Limits
Joined
Dec 17, 2020
Posts
1,480
Reaction score
2,857
Spendy, but that’s best. You don’t want some generic hardware store stuff in there. Metric chassis bolts are hard to find with all the correct shoulder, thread length and hardness matching the original.

If you’re not in the rust belt states you could pull some from an auto recycling yard.
 

Jason in DLH

Cheeseburger and Fries
Joined
Sep 4, 2020
Posts
1,400
Reaction score
1,562
Location
MN
I go to a few place looking for all the lower control bolts for my 07 suburban 2 snapped so changing all 4


Sent from my iPhone using Tapatalk

And I thought I had a rusty truck! Just pulled mine off the other week and came out relatively easily with an impact wrench and lots of penetrating oil (soaked them a few times over a 2 day span prior to removing though).

I did snap the stabilizer bar end link bolt and 2 of the stabilizer bar bushing bolts that I had to cut off. ;) I guess that makes us even. :yaoface2:
 
Top