PG01
Supporting Member
More like a few weeks ago james..lol
2007 - 2014 GMT900 SUV Model Updates
- Thread starter cmatt
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
kbuskill
***CAUTION*** I do my own stunts!
Putting the Escalade gauge cluster into the other trucks is another thing some guys want to do. It requires a custom harness I believe and it definitely requires a custom "Hybrid" bezel to be fabricated by combining the Esky bezel and Tahoe bezel.
@Rocket Man can verify/clarify about the harness.
swathdiver
Full Access Member
A week with no likes or replies, that's a NO! for that one! LOL
petethepug
Michael
Took me a while to find this thread again. The OC switches in our 09 Esky Plat are shrouded and ... GM also added another set of tumble switches behind each of the 2nd row seats on the C pillars for a total of 4 tumble switches in the truck.
It’s kinda weird to open up the rear doors, blindly reach behind the 2nd row seat and toggle the switch to have just one seat tumble forward. This obscure switch location is better suited to have a 3rd row occupant make an easier exit.
Sent from my iPhone using Tapatalk Pro
It’s kinda weird to open up the rear doors, blindly reach behind the 2nd row seat and toggle the switch to have just one seat tumble forward. This obscure switch location is better suited to have a 3rd row occupant make an easier exit.
Sent from my iPhone using Tapatalk Pro
Last edited:
HACK BLOCK
Full Access Member
I would be interested in the overhead folding seat switches
kses123
kses123
Same here.
Bigkevschopshop
Full Access Member
Integrated Trailer brake controller would be nice.
The Raven
Full Access Member
There's not going to be a ton of interest in adding factory options because for the GMT900's there weren't many that are still particularly desirable. I looked into this in 2019 after I tried to trade in my Z71 on something and couldn't find anything I actually liked. I then decided to simply keep my Z71 and add the stuff that I really desired from the newer models. I added a small lift, LED headlights (retro), replaced the seat leather and went with red, and then wrapped the dash to match, changed over the interior lighting to LED and added footwell lighting and lighted door sills, and changed all the 900-generation badges to the 2019 style.
Those are all things I think would be really desirable...but most of them were not offered at all on the GMT900's. So to me the more productive path would be to focus on adding those items either using aftermarket stuff and making it look factory, or possibly trying to actually use the stuff from the new trucks. Obviously that may not be possible, but i've done it before with other vehicles so it can't be ruled out. But things like Alpine's x009-GM "restyle" system are a great example. Pioneer has an even better 9" unit that can be custom fit, but that takes some skill to do.
One thing I can suggest - figure out how to add the factory rear-seat heaters. I looked into it and i'm not sure it's possible, but it's definitely not easy if it is possible. There are two modules that need to be added, in addition to changing out the rear HVAC control module. You could get my money if you could figure that one out.
The rear power liftgate isn't particularly difficult to add, it's the parts cost that's the killer.
I'll add more suggestions as I think of them.
Those are all things I think would be really desirable...but most of them were not offered at all on the GMT900's. So to me the more productive path would be to focus on adding those items either using aftermarket stuff and making it look factory, or possibly trying to actually use the stuff from the new trucks. Obviously that may not be possible, but i've done it before with other vehicles so it can't be ruled out. But things like Alpine's x009-GM "restyle" system are a great example. Pioneer has an even better 9" unit that can be custom fit, but that takes some skill to do.
One thing I can suggest - figure out how to add the factory rear-seat heaters. I looked into it and i'm not sure it's possible, but it's definitely not easy if it is possible. There are two modules that need to be added, in addition to changing out the rear HVAC control module. You could get my money if you could figure that one out.
The rear power liftgate isn't particularly difficult to add, it's the parts cost that's the killer.
I'll add more suggestions as I think of them.
Similar threads
