GM Transmission service

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tiki

Full Access Member
Joined
Jun 4, 2013
Posts
639
Reaction score
318
Going to do a preventative trans service at 42k miles. Called the dealer to setup the service and was surprised to hear that they offer either a full flush and replacement or just drop then land and replace the fluid. I’m assuming that either are fine for the remaining drivetrain warranty, but was curious with which option folks have opted for.
 

mb1500

Full Access Member
Joined
Jan 22, 2019
Posts
330
Reaction score
306
Pan drop would be lucky to get 1/2 of the fluid out of the system, if you want all of the fluid to be changed than you’re going to want the flush.
 

OR VietVet

Multnomah Falls
Supporting Member
Military
Joined
Oct 8, 2014
Posts
19,243
Reaction score
31,665
Location
Willamette Valley
At that low of mileage I would also do the flush but have the filter changed as well.
 

Jason in DLH

Cheeseburger and Fries
Joined
Sep 4, 2020
Posts
1,400
Reaction score
1,562
Location
MN
And filter gasket. ;)

That darn little filter gasket....

I’ve always wondered if service techs take the time to do the little things like clean the pan thoroughly, change the filter and gasket, etc... on their own or if you need to specify for it to be done?
 

Fifty

Full Access Member
Joined
Jun 26, 2015
Posts
791
Reaction score
195
I was told the pan gasket is reusable.
Is there a gasket, or o-ring for the filter too?

dang it... another part I need to source
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
23,703
Reaction score
34,643
Location
Stockton, Ca.
my dealer told me they have to pull the pan and change the filter when doing the service, they only offered 1 type of service (full service), no option to just flush-fill etc
 

Jason in DLH

Cheeseburger and Fries
Joined
Sep 4, 2020
Posts
1,400
Reaction score
1,562
Location
MN
I was told the pan gasket is reusable.
Is there a gasket, or o-ring for the filter too?

dang it... another part I need to source

Yeah. Mine came in a kit with the filter and pan gasket, so you might not need to source it. I’d recommend using the actual gasket puller tool though as it’s in there tight! Not sure on the size however. I used a socket to “gently” pound it back in.
 

gat0r

Full Access Member
Joined
Dec 11, 2015
Posts
3,106
Reaction score
5,828
Location
DFW
my SW told me to only do the fluid flush for the 45k severe duty service

then do the filter & then flush @ 90k-100k
 

Forum statistics

Threads
129,197
Posts
1,812,003
Members
92,299
Latest member
Butterfly7
Top