Mode Door Actuator Replacement

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JonnyTahoe

Full Access Member
Joined
Apr 14, 2011
Posts
1,249
Reaction score
771
Location
Minneapolis
My '00 Yukon Heat was stuck on defrost.DSCF3733.JPG Make sure you remove the correct actuator located on the left side of the heater box. DSCF3735.JPG
 
Last edited:

kly5953

Member
Joined
Sep 17, 2020
Posts
57
Reaction score
37
Ok, I gotta ask, how the hell do you get to the left screw under the passenger side when you have a center console? I spent about 20 minutes and was able to turn it 2.5 turns maybe, now I can’t get a socket on it at all
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,148
Reaction score
25,179
Location
Treasure Coast, Florida
Ok, I gotta ask, how the hell do you get to the left screw under the passenger side when you have a center console? I spent about 20 minutes and was able to turn it 2.5 turns maybe, now I can’t get a socket on it at all

Just twist it out of the way or use a smaller screwdriver with smaller hands, I paid my kids to do that one!
 

kly5953

Member
Joined
Sep 17, 2020
Posts
57
Reaction score
37
Just twist it out of the way or use a smaller screwdriver with smaller hands, I paid my kids to do that one!

aaaaah, my kids are 2 and under....I need to find someone to help with that then. I will say this, I will not be putting that screw back in its place, the other two hold it up more than enough.
 
OP
OP
JonnyTahoe

JonnyTahoe

Full Access Member
Joined
Apr 14, 2011
Posts
1,249
Reaction score
771
Location
Minneapolis
Ok, I gotta ask, how the hell do you get to the left screw under the passenger side when you have a center console? I spent about 20 minutes and was able to turn it 2.5 turns maybe, now I can’t get a socket on it at all
don't try to remove the front console unless you have done it before. There are hidden screws that you will never find and if you pull on the sides you might break it like I did.
 
Last edited:
OP
OP
JonnyTahoe

JonnyTahoe

Full Access Member
Joined
Apr 14, 2011
Posts
1,249
Reaction score
771
Location
Minneapolis
aaaaah, my kids are 2 and under....I need to find someone to help with that then. I will say this, I will not be putting that screw back in its place, the other two hold it up more than enough.
I had the same issue the first time I removed it. Your talking about the long heater cover on the passenger side.
 
Last edited:

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,148
Reaction score
25,179
Location
Treasure Coast, Florida
aaaaah, my kids are 2 and under....I need to find someone to help with that then. I will say this, I will not be putting that screw back in its place, the other two hold it up more than enough.

Just asked my daughter, she used a 1/4" ratchet with a swivel and extension and was only able to turn a little at a time. If I remember right, the swivel was placed closer to the ratchet so it was against the transmission hump and was either connected to another extension or the ratchet.
 

kly5953

Member
Joined
Sep 17, 2020
Posts
57
Reaction score
37
What ever you do don't try to remove that front console under the radio unless you have done it before. There are hidden screws that you will never find and if you try to pull on the sides of it you might break it like I did.
It looks like removing the console wouldn't really even help all that much. My problem is my hands are too big to fit in the location needed to put the socket on the screw. Plus there's a steel frame for the console that's still in the way once I get the plastic bits pulled off.
 
OP
OP
JonnyTahoe

JonnyTahoe

Full Access Member
Joined
Apr 14, 2011
Posts
1,249
Reaction score
771
Location
Minneapolis
It looks like removing the console wouldn't really even help all that much. My problem is my hands are too big to fit in the location needed to put the socket on the screw. Plus there's a steel frame for the console that's still in the way once I get the plastic bits pulled off.
Exactly. You go through all that work just to find out it really did not even help much.
 

Forum statistics

Threads
129,174
Posts
1,811,668
Members
92,269
Latest member
davonlwilliams33
Top