Show off your 2015-2020 lowered tahoes and yukons

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

lynxnova

Full Access Member
Joined
Feb 2, 2012
Posts
493
Reaction score
108
Location
New Jersey
I got the kit from Tony. The drop is 1.5 in the front and 3 in the back if I recall correctly. Measurements are 34" in the front and 34" in the rear on 26" Staggered offset Intros. The drop is perfect. I would have liked to go lower but 2 lowered trucks is enough. The ride on this one is excellent plus not too low where curbs or the street is scraped when parking or exiting from driveways.

View attachment 247524 View attachment 247525
Hello staggered, what offset are your wheels?


Sent from my iPhone using Tapatalk
 

Staggered 02

Full Access Member
Joined
Jul 5, 2019
Posts
634
Reaction score
1,410
Hi Alex,

I believe they are a 30 offset but not 100% sure. I would have to check with Intro. I've had them for just about 18 months. Intro knew exactly what offset I needed. I'll see if I can find out for sure. I need to send them a message anyway to get status on a 24" Intro for my 02 that I sent out for repair.
 

lynxnova

Full Access Member
Joined
Feb 2, 2012
Posts
493
Reaction score
108
Location
New Jersey
Hi Alex,

I believe they are a 30 offset but not 100% sure. I would have to check with Intro. I've had them for just about 18 months. Intro knew exactly what offset I needed. I'll see if I can find out for sure. I need to send them a message anyway to get status on a 24" Intro for my 02 that I sent out for repair.
Cool[emoji1360] thanks again.


Sent from my iPhone using Tapatalk
 

Fsuhammond

TYF Newbie
Joined
Sep 8, 2014
Posts
25
Reaction score
16
Truck looks good. I think you're drop sits perfect for your wheel/tire size.

thank you sir. I did add in the 1” spacer only because I’m trying to track down what is causing a vibration at highway speeds. Balanced both 26s and stock wheels, tried djm sway bar links and then added the 1” spacer to minimize driveshaft angle and still shakes. Oh well, it does sit a touch higher in the rear currently compared to those pics but still looks good for now.
 

lynxnova

Full Access Member
Joined
Feb 2, 2012
Posts
493
Reaction score
108
Location
New Jersey
thank you sir. I did add in the 1” spacer only because I’m trying to track down what is causing a vibration at highway speeds. Balanced both 26s and stock wheels, tried djm sway bar links and then added the 1” spacer to minimize driveshaft angle and still shakes. Oh well, it does sit a touch higher in the rear currently compared to those pics but still looks good for now.
Have you tried to see if you need centric hub spacers?


Sent from my iPhone using Tapatalk
 

Forum statistics

Threads
128,790
Posts
1,805,502
Members
91,773
Latest member
wbhidalgo17
Top