Dantheman1540
Full Access Member
jeez thats some serious chop! What cam?
Dumb exhaust cutout question
- Thread starter Lsnoob13
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
09_4WD_YUKON
Full Access Member
- Joined
- Mar 23, 2018
- Posts
- 194
- Reaction score
- 124
It has a "BTR Stage 2 V2 cam" as the title on the video, but doesn't mention the LSA. It does sound bad arse!!!
Dantheman1540
Full Access Member
Whoops didn't actually open the video just played the small version. Sounds much more aggressive than that. Wonder if its on a 110 lsa or the idle is real low since its not tuned yet. Either way I like!
Dantheman1540
Full Access Member
I might need to play around with my tune maybe drop the idle a hair and see if I can get a smidge more chop.
HACK BLOCK
Full Access Member
so what size cut out for a stock denali exhaust?
09_4WD_YUKON
Full Access Member
- Joined
- Mar 23, 2018
- Posts
- 194
- Reaction score
- 124
Should be for whatever size pipe you ar trying to put it inline with, probably 2.5".
09_4WD_YUKON
Full Access Member
- Joined
- Mar 23, 2018
- Posts
- 194
- Reaction score
- 124
Got any clips of your two?
Dantheman1540
Full Access Member
Heres a little idle vid then small burnout of my RCSB @09_4WD_YUKON
Heres a walk around of my Tahoe skip towards the end for exhaust vid. A lot has changed on the truck since this video but same 212/218 on a 112lsa in a high 6.0 with 10.8-1 comp ratio. Dual 3in exhaust with long tubes and a giant flopro muffler.
Heres a walk around of my Tahoe skip towards the end for exhaust vid. A lot has changed on the truck since this video but same 212/218 on a 112lsa in a high 6.0 with 10.8-1 comp ratio. Dual 3in exhaust with long tubes and a giant flopro muffler.
I have a full description of the cam specs and what all i have in the engine in the description on Youtube. But its a 111LSA.
Last edited:
