OP
OP
Peacock
Full Access Member
Yes the end is open and there's a hole in the inner fender it goes up against.
New 2013 PPV Owner
- Thread starter Peacock
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
Peacock
Full Access Member
Here's a dyno test that lists the air temp
http://blackbearperformance.com/IntakeTestResults_2016.asp
http://blackbearperformance.com/IntakeTestResults_2016.asp
kbuskill
***CAUTION*** I do my own stunts!
OP
OP
Peacock
Full Access Member
Yes, they do supply a plug for it and I'm not sure if the dyno test was with or without the plug. I figure the more air the better, I know what you mean though because on my old cars my air scoops are above the hood.
Hopefully the cowl induction hood I have planned will eliminate some under hood heat.
Hopefully the cowl induction hood I have planned will eliminate some under hood heat.
Tonyrodz
Resident Resident
On my 03, there's an air tube in the fender, feeding cold air to my Volant airbox. Goes from an air scoop bolted below the front bumper to the bottom of the box. With my stock motor, giving it 1/4 pedal sounded like I was romping on it! Sounded exactly how you described it--like flipping the air cleaner.
OP
OP
Peacock
Full Access Member
This takes at least a 4,000 rpm romp while in park sitting in the driveway to get the sound, I didn't test drive it after I installed it. With the shutdowns I'm not sure when the DMV will reopen to register and tag this thing, my 30 day temp tag is out.
Last edited:
OP
OP
Peacock
Full Access Member
Is that something you made or did it come in the kit or was it stock ?
Tonyrodz
Resident Resident
It came in the kit I bought. Got it used from the forums.
Let me find a pic.....
Tonyrodz
Resident Resident
Ok, found most of the pics. I have over 6,000 pics lol!
This is the complete kit:
The square box is the snorkel piece that actually bolts behind a tow hook:
The hose/pipe that's inside the fender that feeds into the bottom of the air box:
This is the inlet on the bottom of the air box that the hose connects into:
It's a very nice setup. I have a dry high flow air filter with some sort of high flow nylon type cover on it.
This is the complete kit:
The square box is the snorkel piece that actually bolts behind a tow hook:
The hose/pipe that's inside the fender that feeds into the bottom of the air box:
This is the inlet on the bottom of the air box that the hose connects into:
It's a very nice setup. I have a dry high flow air filter with some sort of high flow nylon type cover on it.
Tonyrodz
Resident Resident
The cover on the filter:
