Getting ready to change the rear drum brakes on my '99 Yukon. When I checked them a short time ago the right drum had to be pryed off, it was so tight. I backed the adjuster off until the drum went on cleanly and they were fine for a few weeks. Yesterday they locked up in reverse for the first cold start. After they warmed up they were ok. Today they were way too tight again. Had to pry the drum off again. Anybody else have a similar problem or know why the adjuster keeps making them too tight? I might add, this only happens on the right rear. The left rear is fine.
Quick brake question
- Thread starter ajgreen
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Squirrelsmith
Full Access Member
- Joined
- Jan 21, 2018
- Posts
- 914
- Reaction score
- 788
If your going to change the drums u may as well do it right. This is what im doing
https://www.littleshopmfg.com/gm-88-00-k1500-rear-disc-brakes-6-lug-10-drum/
https://www.littleshopmfg.com/gm-88-00-k1500-rear-disc-brakes-6-lug-10-drum/
Nice kit, but I just finished mine, all new front and rear. Cost was a little over $300.
