Diagnosing auto ride issues.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

avalonandl

Full Access Member
Joined
Apr 6, 2019
Posts
2,200
Reaction score
2,629
Location
Troy, MICH & Naples, FL
My shocks look like your second shock- ok as far I can tell. That first one of yours is gone.....

You will loosen 3 nuts 1/2 inch socket- but not fully remove them.
Take a hammer - yes a hammer- and bang on the compressor box frame to move it up and back, then you can pull it. Disconnect harness and air lines. Use a ratchet to reinstall.
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
23,668
Reaction score
34,553
Location
Stockton, Ca.
My shocks look like your second shock- ok as far I can tell. That first one of yours is gone.....

You will loosen 3 nuts 1/2 inch socket- but not fully remove them.
Take a hammer - yes a hammer- and bang on the compressor box frame to move it up and back, then you can pull it. Disconnect harness and air lines. Use a ratchet to reinstall.
(13mm deep socket), loosen the 3 nuts about 1/2 way (one is accessed from the other side of the frame thru a hole), then smack the end of the socket a couple times to push the slotted bolt in, then the entire carriage will slide up and off at a slight angle to the rear.

IMG_20190823_141227.jpg IMG_20190823_141215.jpg
 
Top