What did you do to your NNBS GMT900 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

the_tool_man

Full Access Member
Joined
Oct 15, 2018
Posts
745
Reaction score
1,689
Location
Upstate South Carolina
How did you get the smoke (from party smoker) into the EVAP port on the motor?


Ok, I meant, how did you get the smoke from the machine into the car, I reckon shaping paper into a cone and tape and then into a hose and on from there.

I had a small plastic funnel that worked. I just used electrical tape to hold it all together.
 

Sam Harris

Supporting Member
Joined
Sep 26, 2018
Posts
7,375
Reaction score
14,716
Location
Texas
Hooked up the tech2 and inflated the shocks to 18psi I will let it sit a while and see if it changes, I sprayed soap/water all over don't see any bubbles so far

***edit only been 10 minutes lost 4psi already but can't find the leak :mad:
Don’t like
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
23,408
Reaction score
34,034
Location
Stockton, Ca.
probably just bad luck on my end, I haven't heard anything bad about them which was why I chose it as well as the price and warranty but the dorman has a lifetime warranty as well, I might just keep the replacement arnott they send me as a spare
 

PG01

Supporting Member
Joined
Nov 6, 2016
Posts
14,731
Reaction score
17,778
Location
Up here to the right
probably just bad luck on my end, I haven't heard anything bad about them which was why I chose it as well as the price and warranty but the dorman has a lifetime warranty as well, I might just keep the replacement arnott they send me as a spare
Ohhhhhh, you have my luck...... alllllll baddddd
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
23,408
Reaction score
34,034
Location
Stockton, Ca.
Ohhhhhh, you have my luck...... alllllll baddddd
I just need heavy duty stuff, I tend to break things, when I went to drop the pump to check for leaks one of the mounting bolts was snapped in half, other than that I don't know how I could break the pump I was suspicious of it when I put it in because it would pump and then seemed like it released a lot air thru the valve instead of just a quick little burst.
 

HiHoeSilver

Away!
Joined
Feb 28, 2017
Posts
10,919
Reaction score
14,571
Location
Chicago
I just need heavy duty stuff, I tend to break things, when I went to drop the pump to check for leaks one of the mounting bolts was snapped in half, other than that I don't know how I could break the pump I was suspicious of it when I put it in because it would pump and then seemed like it released a lot air thru the valve instead of just a quick little burst.

Maybe bad from the start then...
 

Forum statistics

Threads
128,790
Posts
1,805,486
Members
91,772
Latest member
dvnt
Top