What did you do to your NNBS GMT900 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

07Burb

GM fan for life
Staff member
Administrator
Supporting Member
Joined
Jan 3, 2011
Posts
49,909
Reaction score
15,453
Hooked up the tech2 and inflated the shocks to 18psi I will let it sit a while and see if it changes, I sprayed soap/water all over don't see any bubbles so far

***edit only been 10 minutes lost 4psi already but can't find the leak :mad:
Pst pst....it’s leaking where you hear the or making a hissing sound :crazy:
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
23,662
Reaction score
34,540
Location
Stockton, Ca.
It might be the pump, I have a spare T connector and so I looped it back to it's self and it still looses air but even faster and nothing on the T connector is blowing bubbles, I sprayed the whole pump and no bubbles there either i don't know where the exhaust port is on this thing
 

kbuskill

***CAUTION*** I do my own stunts!
Joined
Mar 11, 2017
Posts
5,229
Reaction score
8,115
Location
NE. FL.
Ya that's the second arnott pump in under 2yrs that's had to be replaced, shocks seem to be holding up ok, going to go with the dorman pump this time, it will be here tomorrow

I replaced mine with the Dorman pump and so far no issues.

Also, sorry I haven't checked my shocks for you yet... it's been a busy week for me, with no signs of any relief until next week sometime... lol
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
23,662
Reaction score
34,540
Location
Stockton, Ca.
I replaced mine with the Dorman pump and so far no issues.

Also, sorry I haven't checked my shocks for you yet... it's been a busy week for me, with no signs of any relief until next week sometime... lol
no problem I figured there must be a leak because I remember them holding air before but wasn't 100% sure if it was normal or not, me and my friend stood on the bumper this afternoon adding about 500lbs and it kicked on and pumped the shocks up nice and firm but then after we got off it released the air a bit and by the time I got home I could squeeze them by hand pretty easy. I also noticed it seeming to be kind of sloppy when driving sometimes.
 

Wolfbraid

Full Access Member
Joined
Aug 30, 2018
Posts
282
Reaction score
270
Location
Winston Salem, NC
Installed the Vapor Canister Vent Valve hopefully the fix for my P0455, I think so since the old (I think OEM, but likely not) piping that went from valve to canister was rubber and pretty cracked(likely leaking), the new style uses a rigid pipe.
Went a lot easier than I thought it would.

Also ran a can of Seafoam in the tank today, and SeaFoamed the upper...

Still dragging my feet on the driver side motor mount...lacking commitment at this point.
 

Forum statistics

Threads
129,117
Posts
1,810,709
Members
92,203
Latest member
firedog9518

Latest posts

Top