What did you do to your NBS GMT800 Tahoe/Yukon Today?

Rocket Man · Jul 13, 2019

I am in the process of headlight/ corner light upgrades on The Beast. New Anzo u-bars which have clear lenses so I bought some corner lights with flat black housings and clear lenses to match. Undecided on whether I will bake anything open or not. Might open the headlights and remove the reflectors/ paint the chrome part, or open them all up and PTM in Pewter. Also undecided on doing a retrofit on the headlights. I checked with a maker of the Denali retrofit brackets and he said they will work on these Anzo's so if I do that it will be easy. I need to check nighttime light output to see if it's even needed

.

Tonyrodz · Jul 13, 2019

Sold the 22's.
Last pic

Bye bye

SnowDrifter · Jul 14, 2019

Ok I take back what I said about my wheel weights rubbing.

The rubbing noise I had was from the rear, echoing to the front.

And of all the things, rubbing caused by the ebrake not being adjusted out FAR enough. How's that for odd? They're now adjusted to within a cunthair and begins to grab before first ratchet on the pedal. And are dead silent

Rocket Man · Jul 14, 2019

SnowDrifter said:
Ok I take back what I said about my wheel weights rubbing.

The rubbing noise I had was from the rear, echoing to the front.

And of all the things, rubbing caused by the ebrake not being adjusted out FAR enough. How's that for odd? They're now adjusted to within a cunthair and begins to grab before first ratchet on the pedal. And are dead silent

The ebrake adjustment on these is one of the worst things to do. You need them out so far you almost can’t get the rotor back on. Plus they can’t be adjusted with it on. Stupid.

SRQYukon · Jul 14, 2019

I'm finally going to get to dechrome my front end. Tagged a truck in front of me last week. We were rolling away from a traffic light when a car flew out of a gas station driveway into his lane and he did an overcompensating panic stop dead in front of me. I was towing a 2-ton trailer and could get it reigned-in fast enough. Just tagged him at about 2 mph but creased the front bumper (sorry about the BBP tag, Justin). Its hard to see, but the whole bumper is pushed back 1/2" besides the crease. I'm purchasing a black ready-to-paint replacement. May do the grille at the same time.

HiHoeSilver · Jul 14, 2019

Got a couple of these busted. Anybody know where to get just that little piece and not the whole adjuster?

Rocket Man · Jul 14, 2019

HiHoeSilver said:
Got a couple of these busted. Anybody know where to get just that little piece and not the whole adjuster?

View attachment 226708

Headlights?

HiHoeSilver · Jul 14, 2019

Rocket Man said:
Headlights?

Yes. The little white piece for the head of the adjuster screws.

Rocket Man · Jul 14, 2019

I added some self adhesive weather stripping around my new Anzo headlights to close the gaps. Looks way better.

TheAutumnWind · Jul 14, 2019

Got some new hankook ventus st06s on the escalade. They ride so much nicer than the super old and warn out bridgestone dueler a/t's.

Nice lookin tread too.

Just got back from takin the fam to the beach so it is super dirty as usual.

What did you do to your NBS GMT800 Tahoe/Yukon Today?

Rocket Man

Mark

Tonyrodz

Resident Resident

SnowDrifter

Full Access Member

Rocket Man

Mark

SRQYukon

Full Access Member

HiHoeSilver

Away!

Rocket Man

Mark

HiHoeSilver

Away!

Rocket Man

Mark

TheAutumnWind

Full Access Member

Similar threads

Forum statistics

Latest posts