I’m being told my engine is bad

Michigan said:

Thanks for that swathdiver

And thanks I will try the what you guys suggest with the catalytic converters

So I parked the truck Wednesday night around 1 am and have not drove since so it sat for about a day and a half and this was a cold start Friday morning. Again sorry it was just a quick video before leaving to work in a different vehicle so I rushed the video

Oddly enough this time when revving up the engine it did not really make the noise but on Wednesday when I showed it to a few people the noise was there every time I revved the engine. I may have to wait till Tuesday till I get it into a shop.

Click to expand...

Michigan said:

2004 Tahoe z71 4x4

175k miles

Owned it 1.5 years

Got it with 149,500 miles

Has had a minor leak since I got it (was lied to about no leaks)

I used Mobil 1 5w-30 full synthetic high mileage and changed oil religiously every 5k miles along with Mobil 1 m107 oil filter

Always kept an eye on oil level and topped off if needed. Maybe a quart or slightly more every oil change

Engine ran very strong the whole time of owning

Without any signs it has developed a clunking sound on startup. This all happened in the past two days. Actually I had the oil changed yesterday and coincidentally it got way louder after the oil change. Before the oil change I barely noticed anything and I wasn’t even suspecting anything really.

On cold start it is very loud. Clinking/rattling noise. I was told by 2 shops it’s the bottom of the engine. Both shops were confident that that’s what it is. Then there is a junkyard across from my work and it took it to him for a third opinion and he says he’s certain it’s the flywheel that’s cracked. I called one of the shops back and told the guy I’m not going against what he’s saying but I asked him the possibility of it being the flywheel. He said that’s the first thing they checked, he said they removed the cover and all the bolts or screws where there? Not sure exactly.

I tried posting a video through YouTube but for some reason it won’t download. It just keeps saying processing. I tried posting a video directly on here and it says file too large. I’ll try to figure out how to get a video clip soon. I know not much you guys can go by without a video and still hard to diagnose by video as it is but would like to got some opinions

Also is there anything else I should have replaced if I have them do the swap. Both shops are suggesting to get a used engine to throw one in.

First shop say he located one with 113k miles from a guy that they do business with regularly. He want to charge 2,500. Not sure about warranty with him but he said he’ll go through the whole engine before installing and replace any manifold bolts of broken, plugs and what not

second shop said between 2,000 and 2,500 not warranty and can’t promise leaks or anything.

Click to expand...

Michigan said:

2004 Tahoe z71 4x4

175k miles

Owned it 1.5 years

Got it with 149,500 miles

Has had a minor leak since I got it (was lied to about no leaks)

I used Mobil 1 5w-30 full synthetic high mileage and changed oil religiously every 5k miles along with Mobil 1 m107 oil filter

Always kept an eye on oil level and topped off if needed. Maybe a quart or slightly more every oil change

Engine ran very strong the whole time of owning

Without any signs it has developed a clunking sound on startup. This all happened in the past two days. Actually I had the oil changed yesterday and coincidentally it got way louder after the oil change. Before the oil change I barely noticed anything and I wasn’t even suspecting anything really.

On cold start it is very loud. Clinking/rattling noise. I was told by 2 shops it’s the bottom of the engine. Both shops were confident that that’s what it is. Then there is a junkyard across from my work and it took it to him for a third opinion and he says he’s certain it’s the flywheel that’s cracked. I called one of the shops back and told the guy I’m not going against what he’s saying but I asked him the possibility of it being the flywheel. He said that’s the first thing they checked, he said they removed the cover and all the bolts or screws where there? Not sure exactly.

I tried posting a video through YouTube but for some reason it won’t download. It just keeps saying processing. I tried posting a video directly on here and it says file too large. I’ll try to figure out how to get a video clip soon. I know not much you guys can go by without a video and still hard to diagnose by video as it is but would like to got some opinions

Also is there anything else I should have replaced if I have them do the swap. Both shops are suggesting to get a used engine to throw one in.

First shop say he located one with 113k miles from a guy that they do business with regularly. He want to charge 2,500. Not sure about warranty with him but he said he’ll go through the whole engine before installing and replace any manifold bolts of broken, plugs and what not

second shop said between 2,000 and 2,500 not warranty and can’t promise leaks or anything.

Click to expand...

Michigan said:

Thanks again for all the help.

Little update but problem not solved yet

I haven’t drove the truck since last Wednesday (exactly a week)

So this morning I started it up, no noise at all

I drove it to a nearby gas station that has a garage there, about a 4 mile distance from my house

Made no noise at all on that trip even when arriving so I thought great this might be hard for them to check for the noise when it’s not there

I planned to have the guy to lift it and check for the crossmember bolts (I know I should be able to do this myself) also I let him listen to the video and he agrees that more than likely it’s the flywheel (flexplate)

Anyways he said to just drop it off one day.

So I left and I work about 24 miles from there, first intersection I came across I made a sharp right turn and I heard the noise for just a moment

Now that I think about it I forgot to note before any of this really loud noticeable noise I would hear hear this noise slightly when making a big turn I.E going on a freeway ramp I started to notice the same noise

Does this indicate anything or help narrow anything down?

Also for the rest of my 24 mile trip to work I did not hear any noises even when coming to stops and parking.

Click to expand...

Michigan said:

Thanks again for all the help.

Little update but problem not solved yet

I haven’t drove the truck since last Wednesday (exactly a week)

So this morning I started it up, no noise at all

I drove it to a nearby gas station that has a garage there, about a 4 mile distance from my house

Made no noise at all on that trip even when arriving so I thought great this might be hard for them to check for the noise when it’s not there

I planned to have the guy to lift it and check for the crossmember bolts (I know I should be able to do this myself) also I let him listen to the video and he agrees that more than likely it’s the flywheel (flexplate)

Anyways he said to just drop it off one day.

So I left and I work about 24 miles from there, first intersection I came across I made a sharp right turn and I heard the noise for just a moment

Now that I think about it I forgot to note before any of this really loud noticeable noise I would hear hear this noise slightly when making a big turn I.E going on a freeway ramp I started to notice the same noise

Does this indicate anything or help narrow anything down?

Also for the rest of my 24 mile trip to work I did not hear any noises even when coming to stops and parking.

Click to expand...