What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

kiwi said:

Hello everyone!

Got my '19 Tahoe on May 2.

Done till then:
- full aluminum bottom cover (engine, shifter, transfer box, gas tank)
View attachment 223585

- mesh net in the front grille

- full rustproofing of the frame and other needed areas
View attachment 223586

- replacement of the rear air compressor hose to the clean/protected from any mud place

View attachment 223590

Click to expand...

Looks good! A few questions:

Where did you get the aluminum skidplates, especially for the gas tank?

Mesh net for front grill? Please explain?

What type of rustproofing?

Replacement of rear compressor/hose? Please explain?


Looks like you are set up for off road!

Ran a couple sessions early in the morning and loaded back up at 11. Heavy rains, not worth injuring ourselves or destroying our cars.

LT1ZOB said:

Ran a couple sessions early in the morning and loaded back up at 11. Heavy rains, not worth injuring ourselves or destroying our cars.

View attachment 223790 View attachment 223791 View attachment 223792

Click to expand...

That sucks. Is better run away agree.

Sent from my Pixel 2 XL using Tapatalk

kiwi said:

Shop's equipment. Total cost was like $105 with labor. I think they've done it within couple of hrs.
In fact it's just a set of pipes with some connectors and non-return valve
View attachment 223647

Click to expand...

That looks like the rear camera module from an Escalade. I think I see the second camera for the rear view mirror. I’m guessing they tap into the rear wiper washer line.


Sent from my iPad using Tapatalk

cmatt said:

That looks like the rear camera module from an Escalade. I think I see the second camera for the rear view mirror. I’m guessing they tap into the rear wiper washer line.

Click to expand...

Yes, it's just an example picture from the shop. I have only one camera on my Tahoe.

Kpwweb said:

Where did you get the aluminum skidplates, especially for the gas tank?

Mesh net for front grill? Please explain?

What type of rustproofing?

Replacement of rear compressor/hose? Please explain?

Click to expand...

1) All skidplates are from the shop also. I assume it's some local production or their own BTO stuff.
Overall cost was ~$640 for skidplates themselves (honestly i think i've overpaid a lot) + $50 for labor

2) It's just an aluminum mesh fitted to front bumper to protect radiator from insects/stones/birds (lol)
Looks like this (have no photo of my own at the moment, will do later and upload here


3) Rustproofing - Waxoyl professional, Waxoyl Hardwax, Dinitrol for lockers (shop calls it "liquid lockers/wing guards")

4) As far as i understand, by default air intake hose of the compressor is placed somewhere right upon the rear left wheel. So in our climate it sucks dirt/water which leads to the breakage. They re-placed it to the inner of the trunk

Got my husky x-act contour
First and third rows fit awesome, second row is a little bit too wide in my opinion.

kiwi said:

Yes, it's just an example picture from the shop. I have only one camera on my Tahoe.

Click to expand...

Ok, cool and interesting. Would you mind posting a pic of the camera/washer on your vehicle. I’m curious if they added the washer or sourced a camera module with one present.

What’s the shop name/website?


Sent from my iPad using Tapatalk

They drilled a hole in my existing cam module and added some washer

Thanks for the update


Sent from my iPad using Tapatalk