PlastiDip from hell removal

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
30,959
Reaction score
45,061
Location
Central Jersey
WD40 is way to go no questions asked. My scenario definately required a pressure washer too. However required a couple more things...

1. I applied spray can WD40. Let sun bake it in for a couple minutes.

2. Hit with high pressure from pressure washer. Came off like butter.

3. I used dish soap and simple green solution with pressure washer.

I found if I waited longer than a couple minutes after applying wd40, then the plastidip wouldnt come off.

Also, it mostly came off. There is still a nasy residue to get off. (See pic some of that is damaged clearcoat too. Residue is shows up near flash pop, and is all ofver the truck.) Assuming I buff it with more WD40?

Next, the hood is impossible. Not even WD40 cwas making much of a dent :(f96fa1351f6a824783b3182c10cf175f.jpg

Sent from my SM-G925V using Tapatalk
Probably why he dipped it--maybe.
 
OP
OP
Matthew Jeschke

Matthew Jeschke

Full Access Member
Joined
Dec 28, 2017
Posts
1,832
Reaction score
1,219
Location
Sahuarita, Arizona
Yeah, I'm sure that's why he dipped it... Funny as hell because I believed about every other word the dude said. He told me the paint was perfect under the plastiDip lol

Not really sure if I got a decent deal or not on the truck. I actually didn't want to buy the truck because it was very poorly cared for cosmetically. My girlfriend's kid loved it though so I bought it for him. It is a 2001 Z71 w/ 225,000 miles I paid $3500 if I recall right. Drive train functioned (minus rear end which blew up and I swapped out for $300, and radiator which also blew out, I replaced for about $120) but was his off road vehicle and beat up. Other than paint though body is in perfect shape. I've probably put a total of $1500 into it and mechanically it's rock solid, and much of the interior is fixed up. I'm more than impressed with the drivetrain on these trucks its a beast.

The paint is actually in beautiful shape on one side of the truck. Other side is pealing. And the roof is dismally bad. I'm assuming he parked outside with the pealing side in the sunlight. Poor truck was not cared for much at all by last owner. My next step is to buff the truck and see where I get.

I am sitting here thinking with a little effort, and far less money he could have patched up the the clear coat which is what I plan to do.

I want to get a gravity feed electric spray gun. I see they sell them now, just not exactly sure which ones are decent. Then redo the paint job, with factory colors up top. Then bottom panel / quarter of doors in a heavy duty raptor liner or equivalent paint.

I've seen trucks done like that and looks REALLY awesome, just not sure on a tahoe. I googled it but have yet to see somebody that did a two tone like I mentioned.
 
Last edited:

drakon543

Full Access Member
Joined
Feb 15, 2016
Posts
2,473
Reaction score
1,713
as far as my rims which are a much smaller project was just a spray with wd and some rubbing and it just flaked away. afterwards i has to hand wash a few spots as some of the plastidip spots turned back into this goo. good luck
 

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,183
Reaction score
11,447
Damn that’s brutal . I can’t imagine the frustration you’re dealing with. Keep at it, just remember when you’re done you’ll never have to do it ever again :emotions133:
I wish you luck
 
OP
OP
Matthew Jeschke

Matthew Jeschke

Full Access Member
Joined
Dec 28, 2017
Posts
1,832
Reaction score
1,219
Location
Sahuarita, Arizona
Damn that’s brutal . I can’t imagine the frustration you’re dealing with. Keep at it, just remember when you’re done you’ll never have to do it ever again :emotions133:
I wish you luck
It is hell lol man is this stuff a mess. Thanks for empathizing. I have 4 days into this and still that film and hood persist.

Sent from my SM-G925V using Tapatalk
 
Top