Tonyrodz
Resident Resident
Hehe. I had a brand new one in 94--sucked horribly, and the dealer was no better.Tried to make it as obvious as possible by posting one of the worst vehicles ever made
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
mountie
Supporting Member
Yesterday I waxed the entire Yukon - inc roof. The weather was nice / 74 degrees & light clouds.
I will not have a roof that doesn't shine/protected like the rest of the body.
( Then it rained today - but that's ok.....)
I also really cleaned the tires / white letters / finished with "Meguiar's Natural Shine".
Uh, the flat paint on the roof rack.... It's in good condition, but any ideas for a good "protectant" on it??
So it stays good?
On another note...... The chrome wheels on that red Yukon.... They look nice, but to my eyes, the wheel design appear as if they are 15" - 16" wheels. I don't know why, but they look smaller than my 17" wheels.
I will not have a roof that doesn't shine/protected like the rest of the body.
( Then it rained today - but that's ok.....)
I also really cleaned the tires / white letters / finished with "Meguiar's Natural Shine".
Uh, the flat paint on the roof rack.... It's in good condition, but any ideas for a good "protectant" on it??
So it stays good?
On another note...... The chrome wheels on that red Yukon.... They look nice, but to my eyes, the wheel design appear as if they are 15" - 16" wheels. I don't know why, but they look smaller than my 17" wheels.
Last edited:
mattbta
Full Access Member
Just finished up new valley cover gasket, knock sensor grommets, knock sensors/harness and intake manifold gasket. Working on this truck is a different challenge than my LS1 f-bodies years ago. This motor is right front of you but way up high. F-body was nice and low but halfway under the cowl.
Didn't see any fresh oil on the back of the block near the valley pan so I'm thinking my leak is probably rear main.
I did buy an endoscope to look up in there but will do that later...my body aches.
Sent from my Nokia 9 using Tapatalk
Didn't see any fresh oil on the back of the block near the valley pan so I'm thinking my leak is probably rear main.
I did buy an endoscope to look up in there but will do that later...my body aches. Sent from my Nokia 9 using Tapatalk
mountie
Supporting Member
mattbta...... There is no comfortable position working around an engine.
Unless you are reclining on a chair/ w/ cupholder, and someone else is doing the work.
Unless you are reclining on a chair/ w/ cupholder, and someone else is doing the work.
Tonyrodz
Resident Resident
Need one of these.
mountie
Supporting Member
Naw.... I prefer to climb in and snap off the top of radiator hose.
Tonyrodz
Resident Resident
I hear ya. Funny, my gf bought this for me, but I lowered the Hoe lol.
05Single
afraid of the dark
- Joined
- Feb 26, 2015
- Posts
- 8,183
- Reaction score
- 11,448
My dad had a 2001 fully loaded limited he bought brand new. It was actually really really clean. He never had any major issues with it. I almost bought it from him before he traded it in on the Tahoe in 03
treehan77
TYF Fiend
Maybe this help with th big bumps
ArcticYukon
The White Yuke has been superseded by a Red Hoe
lol.... I was about to ask how many THOUSANDS they gave you in addition to the Exploder.
