Issues with my build

Nicolai8775 said:

Hey everyone, I had a question about an issue with my build.

I recently did a cam swap, new lifters, trunnions, springs, a TBSS intake manifold with 36# Injectors and a 92mm throttle body.

I also ordered the traditional tune from blackbear.

Well now that it is all back together I have p0121 and p0122.

I cleaned the MAF like blackbear suggested in instructions.

I took it to a shop to have the crank relearn done

I fiddled with the set screw on my throttle body.

I've replaced the TPS cause we let the valve slap closed accidentally once so we thought we broke the sensor.

I replaced the harness connector too cause the TPS came with a new connector.

Now I've thrown money at the problem and it didn't fix it lol.

Now before all this, I accidentally snapped an intake manifold bolt off in the top of the block. We blew cigar smoke in there and didn't see a leak. Would an intake manifold leak cause this?

I found an old hp tuner forum post about how this was a tuning issue related to MAF sensor maximum settings or something.

Any other ideas?

Click to expand...

BG1988 said:

how does it run with the MAF/MAP ( manifold absolute pressure )disconnected ? it should force factory default setting..


what kind of fuel do you use?
cheap garbage no name gas
or top tier fuel?


what octane rating?

Click to expand...

BG1988 said:

yeah it is top tier..

normally they say the MAF has to be replaced if cleaning it did not work..


you did use MAF cleaner right?

Click to expand...