NORCAL SS Custom 2/3.5-4.5 for all 2wd 2015+ GM SUV

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
NORCAL SS

NORCAL SS

SUV SUSPENSION GURU
Supporting Vendor
Joined
Jun 9, 2009
Posts
8,744
Reaction score
605
That is up to customer. 4 shocks belltech are 300 extra.

If has higher mileage I'd swap
 

ulakovic22

Full Access Member
Joined
Jan 19, 2013
Posts
130
Reaction score
0
Location
Lantana, TX
No, your pick up points on the front don't change with a spindle, so factory shocks work as designed. If you were lowering using springs, then yes, you would need to look into changing it up. On the rear you are able to get around that by using the extenders.
 

crazycrew

Full Access Member
Joined
Mar 11, 2010
Posts
1,354
Reaction score
956
Location
Vacherie, LA
Anyone have rod measurements for a XL or burb with autoride and NO rear spacers? Spring and idolaters only on rear.

Sent from my SM-G955U using Tapatalk
 

crazycrew

Full Access Member
Joined
Mar 11, 2010
Posts
1,354
Reaction score
956
Location
Vacherie, LA
Anyone have rod measurements for a XL or burb with autoride and NO rear spacers? Spring and idolaters only on rear.

Sent from my SM-G955U using Tapatalk
 

crazycrew

Full Access Member
Joined
Mar 11, 2010
Posts
1,354
Reaction score
956
Location
Vacherie, LA
Anyone have rod measurements for a XL or burb with autoride and NO rear spacers? Spring and idolaters only on rear.

Sent from my SM-G955U using Tapatalk
 

Makss

TYF Newbie
Joined
Jan 13, 2019
Posts
1
Reaction score
0
Just picked-up a 2018 Tahoe premier RST 6.2 4wd and it sits too high. Interested in the 2/4 kit. One question: will the drop spindles work with the large Brembo calipers? I did not see a thread to confirm this detail. I want to confirm fitment before ordering.
 
OP
OP
NORCAL SS

NORCAL SS

SUV SUSPENSION GURU
Supporting Vendor
Joined
Jun 9, 2009
Posts
8,744
Reaction score
605
Just picked-up a 2018 Tahoe premier RST 6.2 4wd and it sits too high. Interested in the 2/4 kit. One question: will the drop spindles work with the large Brembo calipers? I did not see a thread to confirm this detail. I want to confirm fitment before ordering.

Yes they do. I've done quite a few
 

Dearmosd

Full Access Member
Joined
Nov 10, 2018
Posts
216
Reaction score
44
anyone have ground to fender measurements with stock 22" rims?
 

mentalmadness

TYF Newbie
Joined
Oct 11, 2018
Posts
11
Reaction score
3
Location
NW Ohio
Im.sorry been running. This kit has been working out great.

We can also set up a 3/5-6 kit.

These trucks you can do 5 and be fine. As long as you cut bracket off frane your fine
I have the 15 non mag or air, did the belltech 2 front 3.5/4.5 rear and the rear was slammed without the spacer... i think it looks great... so i ordered belltech struts for front to go another 1.5... so ill have a 3.5 front and 4.5 rear but i thought rear that non mag or air was even lower like basically 5 inches without the spacer...can anyone comfirm?

Also will I need new uppers? So the front ball joint isnt so raked?

Running 24s 295 35 24 here is a pic from yesterday

20190316_192528.jpg
 

Forum statistics

Threads
128,781
Posts
1,805,301
Members
91,760
Latest member
MyCleftNut

Latest posts

Top