HELP#2

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Wambliokiye

Wambliokiye

Full Access Member
Joined
May 3, 2018
Posts
186
Reaction score
120
Location
Reno, NV
I started her up and this!
20190127_172458.jpg 20190127_172453.jpg
20190127_172644.jpg View attachment 215464
Opinions! I was told the tranny was not lined up and it was torqued into possession causing the all the cracks to the bell. Need advice cuz if this is the car lot covering up i wanna have them fix it. There was gasket seal all over covering up the leak. Guy said geasket seal fell off showing the leak. Help
 

BourbonNcigars

Full Access Member
Joined
Dec 1, 2018
Posts
865
Reaction score
1,840
I can't help on the technical side but was the vehicle bought "as is"? Your first post on this said you bought it 11 months ago. My guess is an 07 was not sold with any warranty (of course I could be wrong), but getting the dealer to fix anything like this might not be a viable option without legal action, which may cost you more than fixing it yourself.
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
23,420
Reaction score
34,049
Location
Stockton, Ca.
that's oil and my first guess would be the rear main, pull off that little inspection plate and look in there with a flashlight
if it's only on the side with the oil filter then check the oil filter adapter above it.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
25,961
Reaction score
50,621
Location
Oregon
What do you mean by help #3? I see your bell housing is all broke to shit- what the hell happened? Flex plate bolts come off at high RPM's or what?
Edit: I saw help # 3 thread. Why do you have 3 separate threads on the same problem? This is what clogs up this forum. Maybe ask the mods to consolidate all 3?
 

thompsoj22

Full Access Member
Joined
Jul 21, 2018
Posts
689
Reaction score
714
Location
california native "REPUBLICAN" high desert
im just guessing also that the leak could be coming from the top of the engine? as to the bellhousing cracks, "YIKES" i would not be surprised to find your pump to converter engagement is fubar,crushed,smashed together. normally i try to sugarcoat bad news but that bellhousing is pure mechanical debotchery! one explanation for the crack is only that hardware was loose installed and somehow the trans jack fell and the trans tilted and that bolt took the full load?
 

Forum statistics

Threads
128,802
Posts
1,805,637
Members
91,785
Latest member
Eliteweapons
Top